Building a sauna from a bar - photos , diagrams, process description

Baths of timber - make choices

question immediately arises - why this material?The bath can be erected of brick, wood, adobe, building blocks, etc.But always keep in mind that the construction will be made with your own hands, it means that the team will not be hired.

If no skills in masonry, the options for the construction of baths made of bricks, wall blocks immediately disappear.And there is one available and relatively simple option, namely - wooden bath .

now also necessary to define what kind of bath you build, whether it is a two-storey bathhouse from a bar or a regular floor option.And also need to choose the type of wood.Most often, for these purposes in the territory of the Russian Federation used softwood and hardwood: pine, larch, cedar, etc.

Unfortunately, the wooden buildings are subject to shrinkage, which can affect the shape and geometry of the timber and, consequently, the appearance of cracks.Many people try to avoid this, the structure of the façade sheathing board, siding, etc., but in the light that leads only to the fact that the tree starts to bad "breathe", syreet, moldy and rot.

To avoid this, you need quality and constant care of the data structure.Even before the construction of a bath from a bar with a loft should be clearly understood that it will require care: tints, coatings special structures and processing antiseptics.

How to build a sauna from a bar - the first steps

When will solve all organizational issues, received a building permit and the project baths selected, you can proceed directly to the very construction. How to build a sauna from a bar? First of all, you need to prepare the foundation for a bath.

optimal views of the foundation for the structure are considered either tape or columnar.What is the foundation to choose depends on the type of land soil, the walls of the material, financial capacity, etc.Baths of timber two-storey building on the best strip foundations, with first floor - of the bar.

When the foundation poured, and scored their concrete design strength (approximately 28 days), you can begin to build a log house.But first it is necessary to carry out waterproofing between the first (mortgage) timbers and the foundation and run a manual sorting of timber.

For first (laying) the crown taken bars with a cross section of 200x200 mm, they do end notching required for further connections between all the boards themselves.These cuttings are of a different configuration.Before making cuttings data, so that they were the same, it is necessary to carry out the marks on the bars of mortgages, and only after that to start cutting out cuttings using chainsaws.

To lay laying lumber come from thin slats (about 15 mm thick and pre-treated with antiseptic), fixed them in increments of 30 cm on the surface of the foundation.These rails are needed, so that the first bar does not touch the foundations of the building itself, it will significantly increase its service life, asthe space between the foundation and the timbers filled with foam, which is an excellent waterproofing and will prevent the timber from rotting.

Among other things, polyurethane foam has a porous structure, and the bottom bar is a kind of additional ventilated.

bath from a bar with your hands - do not miss anything from

mind Once laid the first wreath, you can build a log cabin bath of timber section 150x150 mm and a ready-notching.To do this, on the surface of laying beams around the perimeter of the bath and laid mezhventsovogo insulation on top of the second series of boards.

After laying the second row between two rows of a necessary staple.This is done by means of metal pins or wooden dowel through the discharge hole with a diameter equal to the diameter Nagel.To avoid winding insulation to drill these holes drilled in the rod better advance.

For the same system produced and laying the third and subsequent rows of the framework.Among other things, if we build a bathhouse from a bar, you can not forget about the windows and doors.There are two variants of the arrangement of openings:

• installing window and door frame of the construction of the entire log;
• installation of these boxes at the same time with the construction of a log house.

The first option is preferable, sinceready to stand carcass must, seal shrink even more, and he cant give shrinkage.After felling "perezimuet" (approximately 7 months), it will shrink by 7-11 cm, and if it will be installed window and door frames, the shrinkage can be uneven, and all of these blocks is seriously skewed.

Log cabin ready to lay it on top of the board thickness of approximately 50 mm, the entire structure hiding roofing material and remains a "winter."