Universal plaster - what are its features and key benefits?

Gypsum plaster: characteristics

Any plaster has its own characteristics and is suitable for use in different conditions.Here are the advantages of gypsum plaster mixture.

• Economical and easy to use.If the surface plaster cement plaster, requires the application of at least 4 layers, gypsum - just two.
• provides high adhesion (adhesion to the surface of the material).
• optimum time and effort costs.Unlike cement plasters - plaster dries more quickly.While the average consumption of gypsum plaster is about 10-13 kg / m2.
• gypsum based plaster does not crack and does not shrink.
• has much greater flexibility, thereby achieving the desired result.
• is easy and convenient to apply, simply leveled and does not slip from the surface.

composition plaster

plaster plaster consists of a mixture of modified and natural additives (mineral components).The modified water-soluble polymers additives come from leading manufacturers in Europe.This is the composition and production technology of gypsum plasters provide high performance.

often many consumers are interested in, whether manufactured gypsum plaster with your hands? Yes, it can.But the best quality gypsum plaster is versatile, made in the factory.Since it is there calculated the exact proportions and consistency most suitable for application.Hence the question: what plaster is better?The answer is - the factory.

Gypsum plaster: application

used for plastering walls and ceilings indoors.Applied plaster in the bathroom, the kitchen, the hallway, the living room.Most often it is the room with normal and high humidity.

Gypsum plaster is needed mainly for leveling walls and ceilings and is not intended for decorative finishes.If you want to somehow arrange the wall, the second layer is applied to a special decorative plaster (or decorative plaster) that mimics a particular surface.

technology application

for casual users, who had no previous dealings with any plaster, the question arises - how to apply stucco? For this and briefly describe the technology.

To begin with prepared surface - cleaned and aligned primer.Next, a mixture of plaster prescription, indicated on the packaging.Work can be started at an air temperature of 18-23 ° C and humidity of about 60%.The base must be dry with a small notch (for better adhesion).

Apply gypsum plaster with a wide spatula in two ways: "by the spraying" or "from the bottom up."After the application begins the alignment of the walls with gypsum plaster.This is accomplished using an aluminum rule with beveled edges.Rule Beacon pressed against the guide and start to move it upwards.

Excess solution alignment and removed spatula back into a container for later use.Most often, when applying one layer should result can not be obtained, therefore, repeat the procedure again.However, the second layer should be applied only when the first has dried up.

In some cases, plaster decorative plaster is used to create the original design.It provides not only beautiful appearance, but also excellent consumer characteristics (as well as regular gypsum plaster).