Build Daily

Ceiling

August 12, 2017 18:05

Ceiling lights LED ribbon

click fraud protection

stylish ceiling lights LED ribbon is suitable for living rooms and children's bedrooms, and halls.Mount it can be a multi-tiered ceiling plasterboard on the perimeter of a stretch ceiling or baseboard to the ceiling.The work will require the executor LED strips, power supply.Additionally, you can purchase a controller.

Content

  1. How to Install LED backlight?
  2. How to avoid serious mistakes?
  3. Video ceiling mounted lighting LED ribbon
  4. Photo

How to Install LED backlight?

For fastening tape on the drywall constructions required in the first place to fasten the profile to conduct installation sheets for the first tier.Next, mount the analogy of the second tier.The distance from the last tier to the ceiling should be in the range of 10-15 cm. Given space enough for high-quality lighting installation and its correct operation.

most simple and budget is considered the ceiling lights LED tape with his own hands, carried out for the plinth.This option is suitable for rooms, which recently conducted Wallpapering and yet fillets.Otherwise, it will need to gently cut and perform the work according to the following instructions:

  1. Glue to wall prints with a hollow interior (from its top to the ceiling must be at least 5 cm).
  2. Measure the perimeter of the room, to hold the required amount of compound feeds.
  3. Perform wiring (tape - the power supply).
  4. Check the correct operation of the scheme.
  5. Properly functioning begin gluing tape for a baguette.

held on the instructions of the ceiling lights LED ribbon under the skirting board will create a cozy and comfortable atmosphere in the room.For lighting is recommended to purchase items with an average brightness.Permissible installation of colored ribbons (eg, warm yellow, blue).These products give the interior originality and grace.

How to avoid serious mistakes?

Independent installation though is fairly easy, but has a lot of pitfalls.If the performer is familiar with them, it can be not only beautiful, but also very high-quality coverage of any area of ​​the room.So, to the essential requirements when installing the LED strip include:

  • exact correct polarity when connecting strips (polarity is marked on the tape itself);
  • when installing lighting in rooms with high humidity or a possible increase in humidity (eg in the kitchen) should choose waterproof elements with the IP marking;
  • use of more than 15 meters of strips requires the use of additional power supply units;
  • soldering wires need to monitor the temperature of the soldering iron - no more than 260 degrees;
  • soldering duration should not exceed 10 seconds.

Using these guidelines and requirements to do the job is not difficult.You also need to remember the correct connection of the controller, which will change the frequency and type of tape flicker.It is a transitional element in the circuit between the power supply and illuminators.This illumination of suspended ceilings LED tapes for optimum gloss, and matte surfaces.When choosing a soft muted light or can create a romantic atmosphere.Frequent flickering suitable for gala dinners, parties.

Mounting lighting ceiling plasterboard LED ribbon is held more complicated than installation of a plinth.But in both cases, the resulting outcome will be attractive.Before starting work, it is recommended to further explore all the accompanying photo and video editing.From supporting information can I learn more about the rules of selection and installation of elements gleaned unconventional ideas for LED backlighting.

ceiling mounted lighting LED Video tape

Photo

instagram viewer