Sun protection film on windows : especially the installation

In the heat of summer so want to hide from the scorching sun and rest in a cool place.Installing air conditioner instantly solve this problem, but not everyone can afford to use a cooling device.The reasons may be different: the high cost of air conditioning, living in a rented apartment, health problems, the presence of infants.When you can not install the air conditioner, you can go the other way and save the family budget, if set on a sun-protection window film.

Every year the summer in the country is getting hotter.Especially hard for those who live in apartment buildings and their windows are situated on the south or east side.House heat up very quickly and the room becomes unbearably stuffy.At night in a hot room it is difficult to sleep as the building did not have time to cool down.To at least a little bit to protect your home from the scorching sun, you can pokleit windows on a special sun protection film.

Its main purpose - to reflect sunlight.Of course, the film is not completely able to reflect the rays, but in part it is possible.As a result, the windows pasting a protective film, the room will be less warm in the daytime.Very convenient sun protection film on the glass by the fact that it protects the plants.Previously, many fans growing indoor plants do not know where to rearrange your plants away from direct light source, it is now possible to leave flowers on the windowsill, and not worry that they will be hot there.It is also useful when during the day the film prevents the penetration of solar glare on TV and monitor.Therefore, the film can be glued to the window, not only in living rooms, but also in offices.

Species protectionfilm

The shop sells many kinds of film protection from the sun, but because of the small size, it often goes unnoticed.When you buy a film for windows it is important to decide on the appointment, as the kinds of sun film on windows in the apartment can be a little.

Consider the types of films:

1. Sun protection.This sun protection film is mounted on the windows facing south.As a result, the glass will reflect the sunlight and the room will be protected.Let's not 100%, but still in the afternoon in the room will be much more comfortable than before gluing film.
2. Mirror sun protection film.The main purpose of such a film - protection against the penetration of sunlight and prying eyes.If you live on the first floor, or your house is located in close proximity to another apartment building and windows are located close to each other, the sooner you have to always close the blinds or curtains to shield themselves from the prying eyes of neighbors.You do not need to do now, because the film is achieved by gluing the mirror effect of a one-sided view.See anything in the room from the outside is impossible.When choosing such a film should be borne in mind that in the daytime you can protect your home from prying eyes, when it's sunny, but in the evening, when the room is good lighting (if included lighting fixtures), the protection effect is reduced many times over.But this is not a major drawback of mirror films, it is the use of much more.
3. protective film for windows.It can simultaneously protect the room from the sun and enjoy the shockproof properties.It is very convenient to install a film on the windows of the first and last floors, to protect your home from intrusion.Depending on the thickness of the film and its characteristics, it is possible to ensure that the glass will be saved as a result of a strong impact.This is very useful, not only to protect the space from cheaters and sunlight.If you set a film on the windows in the nursery, you can be sure that even if children accidentally fall into the glass with a heavy object, it does not crumble into small pieces, so - none of the children do not get hurt.
4. Matte film on windows designed to protect the glass doors and walls, located inside the building.Its main objective - to limit the transparency of glass.By the way, some of the owners of offices and residential buildings set instead of glass with a frosted glass film.As a result, you can achieve several goals simultaneously - slightly reduce the brightness in the room, so - to get rid of direct sunlight, as well as to enhance the strength of the windows, and save money for the purchase of expensive insulating glass units with the same properties.

Sun film.Photo:

What are the advantages and disadvantages of sunscreen films

If we compare the sun protection film for windows with familiar to many curtains or blinds, the film wins, because it does not accumulate dust, dirt orIt does not retain heat.It will help to protect the house from overheating, and even save on electricity, because after gluing windows can not often use the fan and other cooling equipment room.

If you leave a film on the windows for the winter, you can keep warm in the heated rooms.This is possible thanks to the aluminum deposition on the film, which reflects the heat from inside and outside the premises.

Once you cover sun window film, you can not worry about the house plants.They will feel comfortable, because the direct sunlight on them does not fall.Besides, you can not worry about the furniture, wallpaper and other items that had previously been exposed to sunlight and the years lost its original appearance.In the room a natural microclimate will be saved.

If pokleit in the window film with mirror effect, it is possible to remove the boring curtains and curtains, as well as not have to worry that the passers-by on the street can see anything in the room.Furthermore, it is not necessary to worry that due to gluing film mirror visibility of the room will be reduced.Believe me, many testimonials of people who use a mirror film for many years, refute these doubts.You can also leave your favorite curtains or blinds - the film will not break the overall interior room.

cost sunscreen film on the low window, so it can afford to everyone.Buy the film can be in specialized stores or ordered through the online store directly to the home delivery.You can choose the color you like, the protective film is now available in several colors: standard silver color, you can choose the shade of "bronze", "gold" or stuck on the window film with a touch of sea surface or young greens.Popular is still a film with a touch of "metallic", as it fits into any interior space.This film prevents the penetration of sunlight, room light is soft and subdued, and therefore, your eyes will not get tired.

On sale you can find the film rolls of different widths and lengths.So you can always buy film for your windows.Standard and popular size sunscreen film - 3 m is desirable to buy a coat with a margin not to worry about that at the end gluing may not have quite a bit of material..Excess film is easily cut with scissors after it will be pasted on the glass.

What are the disadvantages of sunscreen films:

• material is very thin, so it can be easily damaged by vykraivaya desired size or any mechanical action;
• many people often ask the same question as the glue sun-protection film so that it is well kept and did not spoil the glass?Here you can advise only one thing - stick to the film pasting technology, as well as to use only high-quality film.If you purchased a cheap film, as a result of prolonged exposure and being under direct sunlight, it can go bad, burn, and even stick to the glass.Remove damaged material will be very difficult;
• in the evening, when the room lights are included, dwelling windows are clearly visible.If you are important to protect your home from prying eyes, you can leave the curtains or blinds to use.

How to glue sun-protection film on windows

not in a hurry to start the film wrapping, you first need to prepare the tools and surface.

What tools are needed:

• scraper for cleaning windows (with a rubber tip and one with metal sharp blade);
• spray;
• plain water (if your tap water flows with a high percentage of rigidity and a lot of chlorine in it, then it is better to take the spring water or purified);
• stationery knife;
• scissors;
• a plastic or rubber spatula;
• towel or any clean lint-free cloth;
• detergent - baby shampoo or liquid soap;
• film for tinting;
• ruler and pencil.

What you need to know more

work it's best when the glass is removed from the window frame, but it is not always possible.In the film a sticker on the window performance may be slightly reduced because the corners film will peel off gradually over time.

The room temperature should be not too low and not too high.Margins - from +4 to + 40 ° C.When cool the room, the dry adhesive is worse, and when it is very hot, the film may adhere unevenly due to the fact that the glue will dry very rapidly.

humidity indoors should be from 20 to 80%.During operation, often need to humidify the room, it is desirable that in the place where you work, it was wet.

Before pasting a film sunscreen, you need to wet cleaning in the room.If this is not taken into account, all the dust settles on the windows and perform quality gluing will be harder.

How to prepare the surface for gluing sun film on the window:

1. glass must be pre-washed, but not the usual detergents for windows and using diluted in water, liquid soap or baby shampoo.In 500 ml of water 1 tablespoon enoughfacilities.
2. With scraper needed to clean the surface from heavy soiling.Pay particular attention to corners, a good walk around the edges.
3. If you paste a film on the wood-framed windows, the glazing beads is desirable to remove and clean.
4. Windows before pasting to wipe clean and dry cloth, make sure that the glass free of debris and lint.

How stick sunscreen film to save material?To do this, you must make measurements of your windows and think about how you want to paste the film.Our task - to minimize waste.If the width of the window you have enough film, then we will think through how to paste over the glass area.So we do a joint film inconspicuous place.

Raskraivaya material, do not forget to leave the seam allowances on each side of 3 mm, then the excess will be trimmed.

Before gluing roll film roll and examine carefully, there is that comes defective material and if the film is to deploy and direct the light source, it is possible to detect the gaps.

How stick sunscreen film on the window:

1. slowly, carefully carry out the work.Once you have prepared everything necessary, you can begin the process of laminating the glass film.
2. on the table or floor (surface must be clean, firm and smooth) roll film roll and measure out the right amount.
3. a sharp knife or scissors, cut the desired size.The film is very thin, so to make a smooth and beautiful seam on the glass, it is important to cut the film precisely.If you doubt the fulfillment of this part of the paper, use a ruler and a pencil.According to the planned line is easier to cut the film.
4. pasted over surface is prepared.Now you need to drench the glass from a spray with a soap solution.
5. Remove the protective layer of the film.To temporarily neutralize the effect of the adhesive surface plentifully moisten with water.So you can easily glue the film and it will not always stick to the glass.
6. Now carefully attach the upper edge of the film to the glass surface of the adhesive and gently, slowly straighten the material to get rid of air bubbles and wrinkles.
7. Now take a rubber spatula and iron film, trying to clear the air.If you see that the air was, the film can gently pull the edge and once again glued only need to go directly to this place with a spatula.
8. After complete adhesion of the film once again go over the entire surface with a spatula to remove excess water.Pay particular attention to the edges.
9. Excess film can be cut with a knife.
10. All you can admire his work.

Here's another way to film labels, shared by people who master the technique of sticking yourself.gluing secret is just one ingredient - instead of water better to use castor oil or vaseline.It must first be heated and drip a few drops on a lint-free cloth.Cloth to wipe the glass, and then start gluing film.The best time to work - a sunny day when the glass will be warm.Oil well holds the film, and in the autumn will be easy to remove.If you do not want to mess around with the film, it is possible to sew it on the inside of the fabric curtains.

How to care for the film after gluing

is of great importance not only to compliance with all the rules when pasting the film, but also how well done bude care after pasting.It is important not to touch the film hands, so she did not move and wash the glass during the month.A month later, you can wash the windows, but you can not use the funds for glasses with ammonia.It is also undesirable to use abrasive sponges and hard not to scratch the thin coating.

Wipe the window can be a soft cloth or paper towels.Permission is granted to use a rubber spatula to qualitatively clear glass from contamination.

Once installed, you can test the effect of sunscreen film (if it was installed during the summer).Put your hand on the sill of the window, where there is a film, and then on the window sill, where the film is not glued.You should feel the temperature difference.Incidentally, in the summer, when the temperature in summer rises to the level of + 50 ° C, the room temperature will not exceed + 26 ° C.There is much to ponder, and to hurry to buy a few rolls of film shading for windows.