Types of casings on the windows

plat - is not just strips that frame the window.Sometimes the product is a true work of art, although the functional load is present here.Beautiful photo frames in the windows of which we see in the casings virtual museum can be considered infinite, without ceasing to be surprised refinement patterns, the wizard with the help of simple tools.

Types casings

By way

installation independing on how the installation is done, trim are:

• overhead.They mask the gap between the window frame and the wall.Mounted directly on the wall using special nails that have no hats;

• telescopic.You go in the frame by means of wings (projections).Side view resembles the letter H. Close the technological seam submerged window more tightly.

Separation shape

Form casings found:

• flat;
• rounded;
• curly.

To trim did not place accumulations of rain water and snow at the top make a small slope.

Material

• tree.It features environmental friendliness and decorative;
• MDF - the material is very aesthetic, as its shponiruyut trees of different species, but for him disastrous changes in temperature, humidity;
• PVC - does not rot, does not crack;
• polyurethane - allows to give any form of clypeus durable and pliable material.

Jambs carved

design carved on the window casings consists of:

• kokoshnik - is at the top;
• side parts.As a rule they are symmetric;
• Polotenchik - located at the bottom.

All these components are fitted and glued.It turns out this myself fairy hut.

plat of wood

wooden frames on the windows - it's a classic.Material used for so long that it seems his treatment and protection is already known to all.The best for the casings are considered:

• oak;
• beech.

These rocks are very hard and expensive, so now prefer products:

• pine;
• birch;
• alder.

prolongs the use of these products:

• stain;
• varnishes;
paint
• .

If produce casings for his own country house, it acquires its own unique face that would indicate the owner outstanding talent.We can not say that it is a simple affair, but you can still try everything?If it is good to try the product out, and you can be proud of.

Where do we start?Yes to create a stock of tools, of course.

Tools

Check, maybe something from the list you have, and what is not, for so go to the store.You will have to use:

• ax - it is precisely there in your barn;
• a plane - this can not be;
• fugankom;
• hacksaw, but not one, but three:

1. transverse;
2. with fine teeth;
3. with oblique teeth.

• electric drills and drill bits to it;
• may fret;
• knives;
• chisels.

do calculations

At the beginning it is necessary to determine the size of the wooden trims on windows, or work on their production will be lost in vain:

• gap measure up-down windows;
• measure the width;
• perform a sketch where Dimension.

If you have ventured into manufacturing of tracery of fine details, it is best to make them separate from the board 0.1 cm thick. Then you will paste it.This thread is called a note.This option we will consider.

Manufacturing

On jamb carving is of two kinds:

• slotted - more complex, but very subtle.This lace - light and elegant;
• consignment note - a little bit easier, although many argue with this statement;
• Sometimes these two types are combined, but this is the aerobatics.

Let's start with the frame, ie the foundations of wooden trims on windows with cover thread:

• cut the workpiece.The board take the thickness of 0.3 - 0.5 cm important that casing does not interfere with the windows open freely.;
• perform connecting pins
• connect the frame with the help of thorns.Use another method to 1/2 of the tree;
• for registration kokoshnik upper base built up.As used fastener or adhesive tabs;
• frame the casing inside:

1. Fasten the upper limit of the nails.Material - board 0.2 cm;
2. Below anchoring vodootboynik.Blackboard 0.3 cm;
3. Mount vertical rail.

• attached to the frame all of our overhead carved details.previously carefully polished with sandpaper;
• joints carved elements do invisible, which they carefully customize and sealed using nails.Before we arrived, the elements on the sides smeared with glue;
• surface casings are varnished, some paint.

exemplary embodiment of figural carving invoice

To decorate the carved wooden window casings on, there are many patterns - from simple to extremely intricate.Consider the pattern in the form of a flower:

• perform template;
• putting a template to the board;
• take great carpenter compasses and cut a circle;
• is now needed semicircular chisels.They do so much serif, how much will the petals;
• from the center do sampling.

How to make a template?

template is easiest to produce, using a computer drawing program:

• find a photo;
• load it;
• draw out;
• customize chart for its size;
• printed.

Creating slotted pattern

pattern consists of a variety of holes in shape.

Features:

to fragments do not fall apart, in the pattern should be a jumper;

necessarily use a stencil.

Technique:

• stencil impose on the board;
• draw out a pencil outline;
• perform pattern electric jigsaw.

Clypeus to the plastic window

window made of plastic and can be decorated with any frames.They are suitable as a simple trim on the windows, and decorative.The trade pavilions found window frames made of MDF, but it is better not to use them for outdoor use, and inside the house.Window plastic casings of wood bought by individual projects or with templates.

plastic casings

most often for plastic windows and frames set of PVC.Compared with wood are:

• not rot;
• not deformed;
• not crack;
• they do not settle insects;
• they do not need to paint;
• colors allows successfully find exactly what you need for a specific design solution;
• variety of forms, including circular and arched;
• set simply;
• last a long time;
• weather conditions do not affect the appearance.

the construction market can buy plastic decorative trim on the windows of "Alta-profile" in styles:

• «Classic»;
• «Modern».

In color:

• white;
• brown;
• cream;
• colored sand.

This cast curly bracket PVC.Comes with frames offers and slopes.

Beautiful MakroPlast trim on the windows of the company comes from Poland.In this they differ:

• fine quality plastic;
• rich colors;
• realistic texture;
• frost.

Options casing MakroPlast:

• length - 220 cm;
• width -. 4.0 to 7.0 cm

Modern trim on the windows available in Russian factory PRIMO, which is part of a group of companies InterPrimo.They are produced from raw materials delivered from Finland on equipment purchased in Germany.Color mainly bkly.

casings of metal

metal trim on the window called nashchelnikami.They are made of non-ferrous metal sheets.

Benefits

• Because metal can produce the most complex forms of casings;
• colors are bright, saturated;
• elegant patterns and varied.On beauty not inferior wood.