How to lay tile, brick

Rugged, durable and high-quality facing brick is widely used in modern construction.Typically, it is used in the decoration of the facade of the houses and other buildings.In recent years, this material can be found indoors.They veneer columns, fireplaces.In addition to the excellent aesthetic qualities, facing brick boasts of having unique operational and technical specifications.

With bricks you can create an extra level of protection of the walls of themoisture and minimize heat loss.Despite the fact that the laying of bricks with their hands - employment rather laborious and costly, such a house, eventually, will look much better and will serve their owners long period of time.

Preparations

masonry bricks can be carried out simultaneously with the construction of the house, and after a while.This type of work demands the full attention and great precision.It is advisable to use the services of partner.Especially if you have to perform a very large amount of work.Before facing the building can be insulated (see. Photo).

With regard to the necessary tools to carry out the independent work is necessary to have on hand trowel, grinders (a cutting machine), a hammer, a plumb and level.You can preview the photos and video, which shows how to put the facing bricks with their hands, so that he has served for a long time.

solution

The quality of the result is significantly affected by the cement slurry used.It must be prepared in accordance with all rules and regulations.Mortar is prepared using the following proportions: 1 part cement brand M500 to 4 parts washed sand.According density it should be such that it is held form.According to experts it is not necessary to add a variety of antifreeze solution and liquid plasticizers, asbecause they can form efflorescence (white patches on the brick).

Technology laying bricks

As mentioned above, when performing this type of work, you should exercise maximum accuracy, all seams must be the same size.horizontal seam thickness is 12 mm, and vertical - 10 mm.We can not allow to go beyond the joint front of the brick.Just as the water in the rain can easily run over the surface of the tiled wall.In that case the cement slurry hit the front surface of the brick, it must be removed promptly.

If you do not know how to put a facing brick, then it is best to explore all the subtleties and nuances of this work.It is important to know that the work should be done only when the air temperature is more than five degrees.To increase the strength necessary to reinforce masonry every 3 rows metal mesh with a diameter of 3 mm.

Today, as a template for self bricklaying rod used as the video.Before putting a face brick bar, you need to prepare the surface and make a thick solution, which will not spread.

In conclusion, it is worth noting that when you consider all the above subtleties and nuances, the result obtained work will surpass all expectations, and will enjoy its beauty for decades.

Video masonry bricks with their hands