We make homemade bender

Information from this short article can be useful to DIY for which independent repair was never a problem, even if it's concerned the repair of water and other networks.

Especially important is the issue under consideration in the construction of cottages and ancillary structures such as greenhouses.

For such a construction is becoming urgent problem of the bending of any diameter pipes at different angles.Most often required to bend the pipe at an angle of 90 degrees.

Of course, there are special devices and specialists who can solve this problem.But not always all it is located at the next corner or the next street.

Homemade bender, therefore, considered to be quite a good solution for any tasks in bending pipes.

There are several varieties of home-made devices for bending pipes, which are different individual design elements.

However, to make such a device is recommended for those who feels confident with plumbing tool in the hands.

Video:

It is important to understand the proposed drawings, benders, and some of the desirable order in mechanical workshops.

Then remains only to collect bender and use it for other purposes.

Homemade bender will be easier to use if the filling length of the bendable tube with sand.Then, at a bend, the pipe will not collapse in the bend and its bandwidth is reduced.

simplest tube bender can be made with the help of a massive concrete slab with holes drilled in it.

In these holes are inserted metal pins of suitable diameter.

pipe laid between the pins and hand bend in the desired direction and angle.Such a simple tube bender can be used when the pipe diameter to 20 millimeters.

For thicker pipes can use a more sophisticated design bending tool.

on a massive base is necessary to install and secure the two clips, and in the middle between them to fix the frame with a movable third roller.

Video:

tube placed in a (homemade bender), fixed at one end and the other end is picked up by a winch.

As raising the free end, the tube will bend under the influence of the third roller.

improvised benders greatly facilitate the construction works at capital repair of various systems using steel pipes.