Build Daily

Repair Video

August 12, 2017 18:08

Alignment of plasterboard walls Video

click fraud protection
Alignment walls plasterboard photos, how to align the wall plasterboard with their hands , technology equalizing walls gypsum boards

How to align the wall plasterboard video tutorials.

This method has a number of clear advantages over the other - it is a high speed and the works themselves, the possibility of installing additional sound and heat insulation, there is no need to remove the old paint and leveling plasterboard walls with video instruction becomes even easier.Website renovated apartment in the home continues the series of articles on the drywall.

There are two main methods of leveling the walls of plasterboard - without rack mounting and installation.In the first case it is made easy pasting sheets of plasterboard walls (only applicable for even strong walls).The second method is used when the danger of subsidence or deformation of the walls.

start with marking.First hold level via parallel lines on the ceiling and on the floor.This marking a start frame.Further, according to a strictly vertical lines on the wall every 60 cm or 40 cm outline the attachment points of the suspensions to the carrier profile.This distance is related to the fact that a standard gypsum board width is 120 cm. Thus, the edge of the sheet will lie approximately midway supporting rails.

advance should identify exit wiring space, the need for mineral wool or cork sheets for the heat - and sound insulation.Alignment of plasterboard walls into the next stage.

Instruments
Widget from SocialMart

proceed directly to the installation.For floor and ceiling with screws fasten pieces of galvanized steel profile - the so-called starter frame.In order to achieve reliable fixation is required to use 3 - 4 screws on the meter profile.Then precast dowels fasten metal hangers to the wall.Insert the supporting rail in the starting frame, the upper edge of the guide does not abut tightly to the upper profile.Consistently fasten screws for metal bearing to the start frame and suspensions.Insert the following guide.Recommended at the joints with the suspension rails enclose a small wooden blocks to give greater rigidity of the whole structure.You can help our tips for working with profiles and sheets.

start to mount drywall sheets.Pre-treated sheet is a special water-repellent primer.Further, self-tapping screws to fasten sheets of drywall to the frame, based on the calculation that one screw is 30 cm. After the installation of the last page and close the seams serpyanku shpaklyuem.After drying required sanded sandpaper roughness.Now cut a hole under the wall outlet and stretch the cable.We produce the final putty and sanding the entire surface of the plasterboard.We take into account that under the wallpaper you can use any kind of plastered walls with his own hands, under the paint - only the finish, and under the tiles, it is not needed.

Alignment walls plasterboard video

instagram viewer