Would you like to install a bidet or shower hygienic own hands , it is possible

Ifbathroom dimensions are not allowed to install a bidet, while you can find an excellent alternative - hygienic shower.It is compact, convenient, sterilno.Kakoy choose shower toilet?Manufacturers produce products inside and outside the installation method, of course, hidden will look more aesthetically pleasing but also require much hassle to install.All elements of this unit will be hidden in the wall, and therefore to carry out a connection hygienic shower is desirable at a time when a full refurbishment is planned in the toilet.

equipment consists of:

• watering a small diameter;
• hose lengths up to two meters.

Installation hygienic shower in the bathroom often made directly on the toilet, under the cover of, or next to the sink, if it is close.Through the installation of the device, you must take into account the location and mounting height, to all tenants of the house was comfortable to use.Experts advise to buy Finnish or German models that stand compact, attractive and aesthetic.

Installation hidden hygienic shower

All eyeliner comes in the wall, there are models with pulling cord, and there is an implement.The holder can be mounted next to the sink or toilet.Sometimes the installation is carried out in a hygienic toilet shower with thermostat.For installation of this unit you will need a connection diagram of the soul.This installation is very demanding and responsible, the more precise rules for all product installation are met, the longer it will serve as a model for their owners.Be sure you want to create a project that will be mounted on the product.

Wall shower

more unpretentious setting, for its fastening does not require special tools, extensive set of devices, consisting of:

• hose;
• watering;
• mounting plate;
• holder soul;
• installation scheme hygienic shower with his hands .

Widget from SocialMart

principle mounting

One end of the hose is screwed to the mixer, and the other is attached to the spray gun and is inserted into the wall holder.

Warning: deteriorated to shower, you need to use it after the water cover by pressing the special button, which is available on the product, or mounted separately.

shower itself is made of stainless steel, plastic watering can, covered with chrome-plated, bight to be with metal inserts, so that over time it is not bent and did not cause water leakage.Progress installation work will depend on the characteristics of the purchased product to install soul require the same tools as for other plumbing work.

Installation bidet without plumbing skills

Installing a bidet with his hands does not require special skills and expertise.Before starting the installation, you need to choose the high-quality equipment, suitable hanging type, and for parking for small spaces - interior. tools for the job:

• perforator with drill bits;
• adjustable pipe wrench;
• mounting tape for insulation;
• silicone sealant;
• screwdrivers, wrenches.

Connecting bidet begins to get acquainted with the instructions for installation of the product. Next collected water mixer, a rubber tube attached to it.After attaching the hose pass to connect your mixer to the bidet.And sealing gaskets used gum after complete centering device is clamped with a wrench.All connections are treated with sealant, for greater reliability.Installation of siphon in the bidet is performed on the basis of its installation in the sink.Mounted funnel into the hole bidets, laying special ring secured to the underside of the unit.The lower part of the siphon is connected to a corrugated pipe to the toilet drain.

Attention: the hose size should be exactly the same as the size of the drain holes

Next bidet installation yourself enters the final stage.Set the product to the desired location in order to have enough hose length.With the help of a drill to make small holes, so as not to damage the tile you want to include a punch at low revs.Remove the dust with a vacuum cleaner, and insert the plastic plug into the hole.Bolted bidet, necessarily fasten the rubber gasket between the hole and the fasteners in order to avoid the slightest cracks.When the equipment is permanently installed, check the connections to all communications.Corrugation siphon attached to a drain pipe and hoses connected to the water supply system.

Last installation step bidet

Check the operation of the unit, all connections for tightness.If water leakage should immediately eliminate all faults.So be installing a bidet and a toilet.Let such a compact and convenient hygiene items will serve you for a long time and to please their functionality.