House for wells with their own hands - a guide , photo , video

majority of owners of private homes set wells, not only as a source of water, but also to decorate the landscape design.House for wells with a specific design, suitable to your yard and home, will appreciate not only the inhabitants of the home, but also for all the guests.In addition, the roof over the well will never be superfluous - it protects the water from the wind, which is always accompanied by a variety of waste.

Not everyone has the ability and desire to build a similar design with their own hands, so you can always buy ready-made house.Most often they are sold in disassembled form, which facilitates delivery to the meta.Specifically, at the installation site are assembled according to instructions - assembly process is no different from playing in the children's designer, even a child will cope with it.However, it should be borne in mind that the finished structure has a fairly high price.They depend on the material, design, size.Therefore, if you do not have the extra money, it is better to build a house on their own.

What materials are needed?

As a rule, the construction of the house for a well need the following materials:

1. timber, cylindrical timber;
2. wooden boards;
3. siding panels (or slate);
4. ondulin;
5. ceramic or concrete tiles;
6. natural or artificial stone;
7. metal;
8. soediniyaschie and fasteners;
9. other building materials.

Choosing the material, remember already built and decorated objects of your land.Their colors and style should be in harmony.Typically, the construction of the well house are materials that were redundant in the process of building a house or fence.The area around the well strewn with rubble.

Timber and other wood material requires special equipment for processing:

1. electric jigsaw;
2. saw, hacksaw;
3. hammer or a sledgehammer;
4. claw;
5. Phillips screwdrivers of various sizes (drill, dyupeli);
6. roulette;
7. shovel.

drawing the simplest configuration

Make and complete a simple drawing of a desired structure or refer to the literature construction and use blanks.As it is easier and more convenient to engage in the construction site.

frame Erection of roof and house milestones

first step is to produce a measurement of the outer and inner rings of the well.

then from the beam cross-section of approximately 100 by 80 mm collect base lodge.Remember that the distance between the parallel spaced sides should roughly equal to the outer diameter of the ring.

Next, you need to install two vertical uprights, which must be exactly in the middle of the side grounds.To ensure the reliability of their fastening it is desirable to use metal corners.

Racks connect logs or Brasco section 50 to 50. For angles make special incisions base.Reinforced bars are the rafters.

spindle frame to lift water from the well made from a bar, the amount of which must be considered.It should be 3-5 cm shorter than the distance between the uprights.

exactly in the center of the ends of drill holes, the diameter of which can be selected in the range of 1-3 cm, and the depth - about 5 cm

then put on the ends of the top set of holes of the metal plate, which has to be done exactly the same holes..The plates are fastened with screws.

The left side of the spindle is inserted a metal rod, which must not exceed 9 cm, and its end - 4 centimeters out.

right side of the gate is made manual starter.

The thoughtful rack space make the holes for plugs.They infest the end goal.Bushings are lubricated with grease or other lubricant.

At the end of work on the collar fastened the chain with a bucket.

Upstairs set boards that are used for the roof ridge.Make the crate.

final work is completed flooring slate, roofing material or metal.

Making the well house

Standard manhole house design provides for a door size to be approximately equal to 850 to 550 mm.Knock the door of the residues from working with a well or other buildings suburban area, knocking her out of the boards connected 3-4 bars.Between him and the board bars are fastened with screws.For the avoidance of warp doors nailed the third timber diagonally.

Directly house itself, built of decorative building materials, should be left open.Sometimes sheathe slate, metal, brick or decorate obkladyvayut other way.Be sure to treat all wood preservative to increase the lifetime of a couple of years, but for the cover varnish or paint.The concrete ring is often draped with decorative stone.Unusually beautiful and looks well decorated stand for buckets or benches.

Now is not difficult to build a house for a well for you.We have considered one of the easiest ways.Having dealt in a simple design, you can move on to more complex and intricate structures.Ideas and inspiration can be drawn from photos and pictures on the Internet, and how to dig a well with their hands, read on our website.Photos

well design

Video - house for well with their hands