The bas-relief on the wall with his hands

Bas anciently used to decorate all sorts of products and structures.Today, these decorations have been used in a variety of fields.

Bas interior

Application reliefs gives a fairly wide scope for interior design.For example, you can create a separate panel in the form of paintings to decorate the empty walls.

reliefs often used for decoration of home fireplaces.Bas-relief, combined with original lighting creates a truly original picture - thanks to lighting all images will be visible bulge even more clearly.

Bas are perfect for decoration of various kinds of openings.

Unlike another popular option of interior design - decorative painting - reliefs do not require additional color selection.

In the absence of coloring, the volume figure will be manifested through the play of light with artificial light correctly-furnished.Thus the owner an opportunity to create accents in the décor elements in a specifically desired him time - just enough to enable lighting.

In addition to the purely decorative function, bas-reliefs and excellent job with all sorts of functional tasks.For example, three-dimensional decoration allows leveling uneven surfaces, decorate utilities, visually distort space at the discretion of the owner, to create smooth transitions between different functional areas.

Proper combination of the volume of relief and decorative painting allows you to create a truly original and amazing effects.

However, despite its many advantages, the bas-relief is not such a popular option decorating the premises.The problem is the high cost of the arrangement of the volume elements.

Ignorant people often make the mistake of believing that the bas is of modular design, cast in plaster.In fact, such a dressing settling manually and is inherently exclusive.Consequently, everything for a beautiful bas-relief will have to work hard, but with a strong desire from all activities can be managed independently.

general guide to creating bas

for DIY create a bas-relief, you can use a variety of materials: gypsum plaster gypsum-based plaster, clay, etc. For beginners the easiest to work with plaster.and plaster on its basis.

first step

Collect from slats and plywood box with low walls, more like a tray.In its overall dimensions of the box should match the size of future relief plate - and there will be created a bas-relief.

Instead box can use other means at hand, for example, a box of chocolates or under the right size frame, glued to the glass with adhesive tape.

second step

Cover the form of polyethylene.Stretch film so that no folds or else they were as little as possible.

third step

Prepare a solution in accordance with the manufacturer's instructions and pour it into the mold.

If you plan to create an ornament with high relief, insert the wire into the plate for additional reinforcement of the future composition.

fourth step

flooded Leave the mixture on the time of initial setting.This rate is different for different materials, it is specified in a separate order.

fifth step

start creating bas-relief.First you need to put on the plate contour created by a decorative ornament, and then start to increase the volume inside the outline drawn up from the newly prepared mixture.

increase volumes in layers, allowing each layer to harden slightly.

work with plaster comfortable enough - until the material moist from its surplus can effortlessly get rid of with a knife, and the pattern and adjust the chisel cutters for woodworking.

In addition, the material is not completely dried just enough to sand.Perform the necessary processing of the solidified surface is much more difficult.

Inif the depth is planned to create an image, you can solve the problem in two ways.

1. background layer built up around the image, with the result that the elements of the ornament are in a recess.At the end of the background plane grind.
2. Images deepened by sampling a certain number of the base material using the familiar and you chisel incisors.

Bas specific examples

to the process of creating bas been more clear, consider the order of arrangement of the decor in the specific examples.We offer you two of the most popular options - "Lily" and "tulips".Having mastered the order of arrangement, you will be able to cope with the creation of decorative bas-reliefs of almost any complexity.

«Lilies»

first step. Protect the decorated grounds, plastered necessary space masking tape.

second step. Cover the bottom sealer, let it dry and apply primer.It is best to use paint-primer.This composition is remarkable in that after drying a part of a mixture of grains remain on the ground.Due to the roughness created by subsequent layers of finishing are held most firmly.On average paint-primer dries within 2-3 hours.

third step. Using a trowel, apply a layer on the surface of the starting Marseilles wax.This material congeals rapidly enough for an average of 3-4 hours at room temperature.

fourth step. Bend Draw film and bas-relief details.To do this, you need to fix the top of the working surface on its entire length and width of a transparent plastic film.The lower edge, at the same time to fix it is not necessary - you should remain free to turn down it.

fifth step. marker put on plastic film a sketch of the future "lilies" - stems, leaves, buds.

sixth step. After full completion of the sketch proceed to the application of the Marseilles wax under plastic sheeting in accordance with the sketch.Please use the trowel to work, and then the palette knife.

Marseilles wax used is white.In order to create the decor was more prominent, coat finish suitable composition.For example, you can use water, lightly colored maklovitsej.Such compositions may be applied only on the surface of the dried up.

After coloring, you never see the places where the material should be given a finishing outlines stems, flowers, etc.

Your task - to make the planned relief as realistic and relevant thumbnail.In it you will take a very long time, so no need to rush to finish everything as quickly as possible.Work carefully, deliberately and slowly.

After giving the necessary form bas-relief, give structure to harden and start to apply a second layer of decorative finishes - acrylic paint the desired color.

Prepare the paint according to the manufacturer's instructions.On average, these paint compositions are dry 5-8 hours.The exact time to be confirmed in the description of paint used.

Finally, you will apply the final coat finishes - ottochento or as part of another with similar properties.Armed with a broad brush, apply ottochento double layer on the entire area to be decorated walls.The second layer may be applied only after the first drying.On average it takes 1-3 hours.You should carefully paint over every element of the composition.

To make the composition more expressive visual bulk and put into separate sections ottochento white bas-relief.

«Tulips»

Preparation and directly work on the creation of a "tulip" is performed on the already-familiar pattern, namely:

• applied plaster and paint-primer;
• applied the first coat of wax Marseilles;
• glued film;
• created a sketch;
• applied directly to relief;
• surface is covered with paint and ottochento.
  

  Bas "Tulips»

only individual recommendations can be given for the establishment of tulips.That the colors appear smooth and realistic, form buds by hand and then added gently treat the surface with a slightly damp sponge.

Creating a bas-relief with his own hands is quite complicated, painstaking, time-consuming and requires tangible financial costs of the event.However, with the right approach you will be able to give the interior of their homes unique look.

Successful work!

Video - Bas-relief on the wall with his hands