How to close the sewer pipes in the bathroom - options tips

One of the basic rules of design art in the design of modern apartment is a rational organization of the living space of each room.It is primarily concerned with the bathroom, because here the main role played by the requirements of sanitation and hygiene.

reasons for disguising communication

When laying or repairing of pipes for hot and cold water supply should be carefully hidden.Otherwise, mounted on top of the pipe walls spoil the look of the bathroom.On a long operation of the pipeline in the bathroom often corroded, and the paint on it swells and darkens.If the ventilation in the room is not too effective, then, as a rule, culverts surface is covered with moisture.Moreover, they can form slime.

Hiding pipe in the wall

If the house in which is your apartment, and a new bathroom settling "from scratch", then the easiest way to disguise the pipelines will be assembling them inside the walls.Care must be taken that the installation drain kontruklon not formed.You should also consider the possibility of finding in the bathroom washing machine room.It is necessary to determine in advance the place of installation of plumbing fixtures and identify the most rational arrangement of the wiring.And do not forget about such circumstance, as a future scheduled maintenance or emergency.

When installing valves installed on pipes for hot and cold water so that was the most ready access to them.And in an emergency water leakage in the bathroom need to be free to get to the pipe.Such forethought will help to quickly troubleshoot and not spoil the decor of the bathroom walls in search of a place of leakage.We should not forget that the pipes equipped with valves (hot and cold water), can help to repair or replace the faucet, without overlapping the total riser.Well, if the bathroom in an apartment inhabited by long time, things will was much more complex.

Hiding pipe using

box Hide the pipe in the bathroom, you have two methods.The first - the most convenient and practical that can be done yourself - put the protective box.The most simple and easily constructed structures made of moisture-resistant flat material.This can be moisture-resistant gypsum board, painted with paint, MDF panels, mounted on a frame, or even a pair of resinous planks treated with a special compound.All this is connected at an angle of 90 degrees.Sidewall boxes placed vertically.It hides the bulk of the tubes.The upper structure is secured to side wall.The walls of the duct are fastened together by means of metal parts and screws.The whole construction is fixed to the wall with the help of various compounds.

There are many ways of decorative coatings to such a structure.This variety of options for pasting a film, painting or cladding different materials.In addition, the top shelf can be mounted.The main advantage of this design - easy dismantling at the precarious situation.

Masking tubes using tiles

One of the options is a labor-intensive masking wiring through the wall tiles.To make this work you need to prepare the ground.Made frame of wooden slats.Frames are connected to each other in the frame in which you want to hide the pipe.The finished design is closed with plywood or other moisture-resistant material.

next stage - sticking to the steering grid frame to create a base under the tile, which is scheduled to put on top.After that, the rear pipes installed support bars.Bar to withstand the desired size, it must be secured with a wedge between the wall and the rear side pipes.And then on the tube can be worn specially made for this purpose cover.Further laying tiles, allowing the surface oblitsevat most attractive design, is performed in the following sequence.First, the vertical front side is coated, then - the end, then - the horizontal surface and the upper part.

Both described variants of masking pipes in the bathroom is easy to perform even their own hands.Therefore, patience and perseverance, you can refine the interior of your bathroom, hiding the inner lining of communication in the frame, lined with tiles.This will save you quite a decent amount of money from the family budget.And the dismantling of this construction will be less costly and time-consuming.

tips disguise pipes

• - supply and discharge of water to the washing machine can be fastened to the wall with clamps for the bathroom, which reliably disguise them.
• - When installing pipes for hot and cold water is important to remember that all the dimensions of the elements connected to the sanitary appliances should have allowances for thickness of cladding material.
• - Making facing work in the bathroom, do not forget about the possibility of access to siphon bath or shower, providing a special sanitary manhole.
• - When using chipboard for masking the wiring box must be fixed to the board, between the wall and fixed communications, self-tapping screws.

Photos camouflage pipes in the bathroom

Video - repair toilet European style