Making automatic garage door with remote opening

What are the mechanisms?

Nowadays there are three types of open outdoor gate:

• swing;
• recoiling;
• garage.

Swing - a classic look.The gate consists of two valves, fastening to pivoting hinge to a vertical base, deeply and permanently installed steel frame.For manual or automatic opening sashes need space in front of them.

If you want to make automatic swing gates for villas with their own hands, it is advisable to view this video:

Sliding on rollers, usually one fold, is technically simple design, since the weightthe gate is distributed on the rollers, and for wind confrontation and transverse loads establishes additional guides.Such mechanisms are complicated to use, but at the same time, just enough to make the mechanical part of the hands.

If you are interested in this option is an automatic gate to the fence, be sure to view this video overview:

Garage roller type - a set of curved slats of metal, coupled movable lock placed inthe guide grooves and connected into a single structure.Moving along the grooves on the ceiling, they break to pieces in the castle, thereby overcoming a right angle, and the gate rails run from the ceiling, freeing the entrance to the garage.

Garage tilt-type make a difficult maneuver, going up and freeing the passage.Automatic lifting mechanism is complicated to install and operate.

Operating principle

opener swing gate - is a set of two motors and control system, which monitors the position of the valves and sequence of their opening / closing.Valve with overhead-groove profile should start moving the first, with automatic gate opening movement and end at the close of the last.Also, the movement must stop at the extremities of the flaps position.Power motors depends on the weight of the valves - the heavier, more powerful engine and gearbox are needed to manage them.It is also necessary to consider the web area, the impact on them of the wind.This will add an extra load motors.It is better to anticipate and make emergency opening outdoor gate, in case of failure or lack of electricity, in manual mode, the readout.

As in the factory and in the home-made drives, mostly used actuator, which is depicted in the photo below:

It is a threaded stud with a screw coupling on it.Due to the rotation of the stud is screwed in a threaded coupling, thereby moving along the hairpin.

From the thread pitch depends on the reduction ratio, the smaller the step is, the more force can pass actuator.As a motor, you can use the geared motor car wipers or windows.

mechanism automatic sliding gate is fairly simple to implement.One engine, one gearbox.Transferring linear motion can be toothed rack, chain or motorcycle.Automation ensures extreme positions sash is closed or open.The main highlight - a rigid leaf design and a system of rollers that hold the structure at the time of closing and opening.Also provided is a confrontation lateral load during the wind.The main task to make a balanced flap easily and effortlessly went on rollers and guides.During the development of the gate is necessary to provide emergency opening in case of failure or power outage.In an e-mail.the drive is also possible to use the engine from the window or janitors.

Garage automatic gate, in turn, are divided into Rolled (they can still be called sectional) and tilt-up.This type of difficult to do by yourself because of the complexity of production technology.Their advantage is that the production takes place on the individual order in the shop, and the installation is carried out by a unit, so do not take much time.

Total

Now the market is widely represented range of mechanisms and elements in order to be able to make an automatic gate with remote opening and closing.

In this article we have tried to acquaint the readers with the existing types of mechanisms and supporting the idea of ​​an independent choice of a suitable option for a country house, indicating the points that you need to pay more attention:

1. windage.Wind resistance.
2. weight.The load on the opener.
3. Emergency opening in manual mode.Easy to implement.
4. Suitability repair and ease of maintenance.

Hopefully, now you know how to make an automatic gate with their hands and what should consist of a mechanism.If you liked the material, why not share it with your friends on social networks?

will be helpful to read:

• How do street lighting on
• dacha How to install solar panels with their hands
• How to save electricity in a private house