Build Daily

Installation And Connection

August 12, 2017 18:07

A simple way to install an electric oven

click fraud protection
Dignity electric oven than gas is a wide range of possibilities.It can be used in a house with gas as the electrical grill, a microwave oven and, in fact, the oven.At the same time the connection model, running on electricity is allowed to make without calling a specialist that is also a plus of this option.You do not know how to connect electrically the oven to the network itself?Further, we are not only the essence of the wiring, but also step by step installation technology in the kitchen headset!

Contents:
  • Step 1 - is determined with the method of mounting
  • Step 2 - Install the housing in place
  • Step 3 - We produce electrical

Step 1 - is determined with the method

installation

Countertop Installation

The first thing to determine is the following points:

  1. device model dependent on the hob or independent (connected or not connected with the cooktop)?In the first case, the panel and connect the oven needed to the same outlet, both devices must be interconnected in accordance with the manufacturer's recommendations.Independent electric oven can be set separately, and put a gas hob (it is more economical) to it.
  2. Which power technology?If power is not higher than 3.5 kW, may be used to connect to a power outlet.Otherwise it is recommended to bring a separate power wire from the junction box, by means of which it is necessary to connect the device.
  3. there stand the wiring in the house of such a burden?We continue to question the power of the electric oven and determine how suitable wiring divorced housework.If you live in Khrushchev, and the replacement of electrical wiring in the apartment was not made, of course, the cable will not sustain current loads in excess of 3.5 kW and will have to completely change the wiring route.If you have recently made repairs, and are sure that the cable wires withstand current strength of more than 16A, do not worry and move on to the installation work.Here it should be noted that the wiring must be grounded.Connecting an electric oven with a fork to make prohibited without grounding.

Deciding these issues and create favorable conditions for installation of equipment, you can go further - directly to the installation!

Step 2 - Install the housing in place

most commonly used technique enclosure, built in kitchen, allowing you to keep the interior of the kitchen and save the free area of ​​the room.Modern manufacturers of furniture and equipment create a single standard, the housing is ideally served in specially designed for this section of the headset.All that you need - accurately install electric oven into place under the table (as shown in the photo) and align strictly on the level.Accommodation in niche

Please note that any imbalance negatively displayed on the efficiency of heating.Furthermore, improper installation 80% of the cause of failure of equipment output!

Using a builder's level, adjust the body, so that it was exactly in horizontal and vertical plane.Alignment is performed loosening legs, in fact, as well as the installation of the dishwasher.For the device does not overheat during operation and not prematurely broken, be sure to consider the following requirements, which will allow to properly install an electric oven with his own hands:

  1. distance from the bottom of the enclosure to the floor should not be less than 5 cm, it is better 8.
  2. air gapbetween the kitchen unit and the side walls of the oven must be 5 cm.
  3. from the back wall distance should be at least 4 cm.
  4. Take care to close with appliances socket (if the power does not exceed 3.5 kW) was installed.To make a connection through an extension cord is extremely prohibited, unless of course you have not done an extension cord with your hands!

Space requirements

's all requirements for installation of the electric oven in the kitchen headset.The last thing left - to make a connection to the mains.

Step 3 - We produce electrical

Here we come to the final part of the process in which you want to connect an electric oven to the network.For information on how to make the connection to a conventional power outlet, we will not tell, everything is obvious.If you have decided to withdraw the wire from the junction box, then things are a bit more complicated.

First of all it is necessary to turn off the electricity at the inlet to protect yourself from electrical shock.If not withdrawn from the body cord to connect to the network, you need to find the terminal strip on the rear side and using PVA wire VVG any suitable cross-section, to have a core in the corresponding terminals.The other end of the conductor must be connected to an introductory veins (from the junction box).Be sure to observe the color coding of wires: Phase (brown) is conducted to the terminals L, nil (blue) to the «N», earth (green) to «PE».wiring

Before you connect a cable, ensure that it is able to withstand the current loads.To make this calculation and current capacity of the cable cross-section.Typically, power 3.5 kW electric oven using a copper three-wire cable, section 2.5 mm.kv.If the load is greater, it is recommended to use a conductor with 4 cores mm.kv.The connection with the opening cable

In addition to this, you need to protect yourself from electrical shock as well as the very technique against short circuits and overloads.To do this, connect the RCD and circuit breaker, as shown in the diagram below.About how to choose the RCD and circuit breaker we have said, with what you read and recommend!Replacing the automatic

The simplest protection scheme

In the end, you must verify the installation and connection of the electric oven and then turn on the electricity distribution board.If no spark and light display works, then all you have managed to properly connect with their own hands!

Worth also view the instructions video on which the connection process is shown in more detail:

Option 1 - Connection via outlet
YouTube Preview
Option 2 - quality electrical

YouTube Preview

We hope that now you know how to correctly install and connect the electric oven with his own hands.If you have any questions, leave them in the comments or ask our experts in the "Q & A" category!

instagram viewer