Features installation of an electric towel warmer in the bathroom

In fact, mount technology is not very complicated, and to cope with it even a novice electrician.The list of works is reduced to mounting the product on the wall and connect to your home network.Regarding the latter, the connection can be done either through the outlet or directly from the junction box, extending the wiring hidden way.Now that you understand how to properly install and connect the electric towel with his hands, provide a detailed step by step instructions:

1. Prepare all the necessary tools for the installation and connection of the electric towel warmer: building level, a marker, a screwdriver, a drill for tile, a tape measure and indicator screwdriver.
2. Decide option to home network.Connecting directly on the junction box is more secure, but at the same time, it is necessary to take care of the output wires in the right place when installing wiring in the bathroom.Otherwise it is necessary to destroy the decorative trim that is not correct.With regard to the supply from the wall socket, this option is more dangerous, but if you select the correct installation height of the outlet, the distance from the water and the type of housing (it has to be waterproof), there is nothing to fear.
   
   
3. Prepare the wall for installation electric towel rail - to mark their own points for mounting, and make sure that they are at the same height with the help of a spirit level.
4. screwdriver drill and hammer into them dowels, reaching complete.
5. Assemble towel dryer according to the scheme specified in the data sheet.
6. Make connection input wires to the terminals of the device (if it is carried out for concealed installation without sockets).Prior to this, do not forget to turn off the light on the distribution board.Place wiring connections necessary to protect heat-shrinkable tube or special waterproof casing.
7. Perform installation electric towel warmer to the wall in the bathroom.There is nothing complicated, just need to press it to the wall, which would coincide with the opening bracket, and tighten the screws.Please note that to make fixing up banned feet.In this case, the device may not work properly, if not fail.
8. Make sure that the connection and installation have been effectively made: stir the product and make sure it is securely "sitting" in the wall, check the wiring.
9. Turn machine on the distribution board and check the operation by pressing the power button.Immediately should illuminate light indication and the bottom will heat the entire chrome tube.

Here and all installation and connection of the electric towel warmer with their hands the technology.As you can see, the installation is really simple and does not take much time.At the same time the call specialist will have a value of not less than 3 thousand. Rubles (the average price in Moscow).Finally we recommend necessarily connected to the wiring in the bathroom RCD 30 mA, which will protect you from electric shock when it leaks.

to you visually see how to install an electric towel rail on the wall of the tile and drywall, be sure to view the detailed video instructions:

In addition to this, we recommend a look at the photo of the existing options for device design:

Also read:

• Ascorrectly connect the RCD
• overvoltage protection devices in the network
• How to make the light in the bathroom