Water supply in a country house with their hands

biggest necessity for a country house is the plumbing.Against this may object only person who likes to be dragged to the nearest well or a column to fill buckets and is doing this way back on several times a day.It may happen that the centralized water supply in this area is not available, then one option remains - to make the water supply of private houses with their own hands.

There are different schemes of water supply system in a private home, but we are interested in only one that includes the most necessary items, such as:

• nearest well or borehole;
• pumping station serving for the discharge of water in the supply chain;
• external and internal water pipes;
• hydraulic accumulator;
• plumbing fixtures.

Hot water supply of private homes

Hot water supply of private homes, whose scheme is quite simple and is a double-boiler with separate heating or heating functions and can instead install a storage water heater is powered from the mains.

Before you implement an autonomous supply of private homes scheme is necessary to understand which of the three options is most convenient to use in your case.The first option is the easiest - it is well.The next option is the least expensive - a hole "in the sand."The aquifer is usually located at a depth of 10-30 meters, you need a submersible pump.Water from a well is quite clear, but to ensure the need to put an additional filter.

For most pure private house water supply scheme must provide for the use of time-consuming and costly method - the artesian well.Despite the fact that it is quite a deep source, the pump will not be required, borehole water is able to provide the whole village.

If the source is a well, a pumping station is preferably located in the annexe or the house itself.In such a case, paving the plumbing in the house to do the trench from the well below the level of the ground freezing and then bury it in the pipe.

Metal pipes are well bent, so the bent, omit it to the water level, not forgetting to insert a strainer.Drop tube on to the distance to the bottom was about 40 cm. From the well to pump water, fasten the bottom of the pin and fasten it to the pipe.

Installation water supply system in a private home involves the installation of in-house or directly above the wells (caisson), pump station or a submersible pump.First, the water enters the accumulator and from there is sent through the pipes to the consumers.Expending water consumers thereby reduce

pressure in the system, there is an operation switch and turn on the pumping station, which supplies water to the accumulator, raising the pressure up to 3 bar.Once the relay is activated and the pump station stops working until you drop the pressure.

It seems only recently for water pipe insulation in a private home, the best material was quilt.Those days are long gone, now appeared on the market such insulation as polystyrene foam, fiberglass and basalt seal.There is no doubt that the laying of pipes below the frost - the best way to protect them, but it does not help when the depth of frost penetration below two meters.And then it is necessary to use the above-mentioned heaters.

The video below explains the principle of the work is already finished system of private homes water from the well, and how to do it.

Pin water pipe in a private house in two ways - external or internal wiring.To do this, polypropylene pipes in houses made of stone hidden in the walls, in specially made recesses and wooden structures, they are placed under the panel.

Perform installation of water supply of private homes recommended polypropylene pipes.

These pipes are welded at the junction, thereby providing full tightness of the system and making it impossible to have any leaks in your home.

Before you spend running water in the house, you need to create a literate wiring plan and it is desirable that it acted professional.The circuit wiring in a private home water begins from the water supply point in the house, continuing to the entrance of the heating boiler.Further, following the plan of wiring running water in the house, the water goes to the main point of analysis, such as the bathroom and kitchen.

The picture shows the conditional scheme of water supply system in real conditions under the plan is individually designed house specialist.

Widget from SocialMart

After the Supply Pipe to the private house is finished, you must connect to the mains all the elements of the system, to check their work to ensure the reliability and absence of leaks, to achieve elimination of the identified faults.

Making water a country house with their hands, you can be proud of it, as the quality and the diligence with which you carry it out, can show much better characteristics than in urban centralized systems.

Water supply in the country with their own hands

Practice shows that the lack of running water in the country, it makes life uncomfortable, and sometimes simply impossible.If properly understand and correctly implement this project, to build a water supply in the country with their own hands is not so difficult.And you can make it so that the system will function at any time of the year.

summer water

This holiday water settling with their own hands is very simple to manufacture it is necessary to have only hoses and fittings.It is used for watering plants in the city.Domestic manufacturers to connect hoses release latch, with one end of the device is placed "ruff" and the other - a spring loaded connector, providing leak at the junction.

With constant water supply summer cottages with their own hands the case to be somewhat more complicated.

Pipes for him being put into the ground, only cranes remain on the surface.Bury a water

oprovod do not just sprinkle on top of the ground, so as not to give rise to theft.

only drawback is still there, you have to be laid so that there was a constant slope to the main highway, and at the bottom set the drain cock.Before the onset of winter, do not forget to drain the water from the pipe to avoid being blown with the onset of cold weather.This scheme

water garden can be operated at any time of the year.Taking as a source of a well, a water you produce, without great skills, and then your cottage will never be left without water.

for supplying water to a submersible pump system is needed, depending on the depth at which it will operate, its output is selected.When installing the water supply system in the country trench n

necessary to do the depth of more than half, to accommodate the pipeline below the freezing level.After that, it is recommended to fill crumb foam or expanded clay layer of 30 cm. This is not the only way of heating water pipes in the country.It is now widely used by an electrically wire entwine around his pipe, put on top of the insulation of polyethylene foam and placed in the trench.

First how to do plumbing in the country should be in the vicinity of the well pit to build a 70x70 cm around the one- depth.The bottom is covered with concrete and brick walls are laid out, there should be water main pipe and electrical wiring.This structure is necessary for timely disconnection of the submersible pump.

Also check out the video below, which gives details about the tools that are needed for the construction of water supply system, the materials and the process of laying.

Pipes, Water-folding cranes and devices for water supply system in the country

Experienced plumbers before you hold water in the country, it is advised to first select what you will use the pipe.Variants enough, but it is best suited for water supply schemes cottages polypropylene or plastic pipes.These tubes are easily soldered special soldering iron, bend in all directions, and is very durable.Summer water from plastic pipes will serve you and your great-grandchildren.In the video very clearly talks about all kinds of tubes that are used.

cranes, used to be on the street fit both conventional and with the Bucs.It is desirable to mount the valve metal, corrosion neboyaschihsya, usually cast iron or bronze.For Water-folding unit best suited standpipes, they are proven to work at low temperatures.

course, professionals will make installation of water supply systems in the country faster and more reliable, but if you want to do it with their own hands without fail try to fulfill all the requirements.