Skol in the bath : what to do , what to cover and paint .

stone chip on the bath - whether it is necessary to eliminate

reason that there is peeling in the bath, is very simple - its cover does not withstand mechanical impact.Most often it is a question of the impact of a heavy object falling from a height.This may be, for example, a wrench, during replacement uronenny mixer.Even your favorite jar of gel will cause damage to the bath for the soul, if coverage is poor.Such troubles most often await the owners of steel products.

presence of such a defect could be ignored, and if it is you do not worry much, but there are a few "buts".

• Rust.Appearing as a result of the oxidation of iron, soon it is not simply "decorate" a place of enamel damage and will corrode the product further.In this room you will not be able to avoid constant exposure to moisture on it.
• Skol - a small depression where punctually will accumulate a variety of pollution and fat.Little miss to care for a bath, and a favorable environment for harmful microorganisms provided.
• Aesthetics.And a little bit of beauty.If you're willing to put up with a small defect in the form of dark spots, it is unlikely that the same loyalty treat a large rusty spots.

And let you not demonstrate a bath as a model sanitary art, is to worry about the long term of its service life and attractive for themselves and family members.This can be done through various means.

How to seal the chip on the bath - preparatory work

Few know how to close up chip on the bath.It's important to understand how to do this for a long time to the result of feast for the eyes.First and foremost, take care of the implementation of the preparatory work.Their volume will depend on the state of damage and the time of its formation.If the stone chip has appeared 15 minutes ago due to your negligence, then the step of removing the rust - this is clearly not your case.

• Cleaning rust.To do this you will need: knife, screwdriver, a variety of needle.With their help, remove what you can.All 100% clean surface of the bath you can not, so please be rust converter.Use strictly according to the instructions!It can be easily found at hardware stores, but in extreme cases, use household cleaner the appropriate destination.Complete this step by thorough washing the treated area with clean water.
• decontamination.Here you will come to the aid of a wide range of the same household tools - from washing powder to the well-known Fairy.An exception should be only those containing large abrasive particles.After cleaning the surface of the bath is necessary to wash and dry the hair dryer.
• degreasing.The surface of the cleavage should be well degreased, which used acetone.Following these simple manipulations again, use a hairdryer.

Then you have to put into practice one of the methods described below bath partial restoration.

Eliminating the cleavage in the bath - what to cover and paint

Terminate the stone chip in the bathroom you can use the "grandfather" or more modern methods, choose.The former include the restoration:

• glue BF-2 and whiting (chalk, powder, etc...);
• epoxy resin and porcelain chips.

In the first case, the cleaned surface cleavage glue is applied.It is covered with a thin layer of white that are carefully leveled normal brush.Wait until this "patch" will seize, and repeat the procedure.The number of repetitions depends on the depth of damage.Last restoration layer should be flush with the undamaged part.Work is not the most time-consuming, gives a good result, but it requires quite a lot of time to complete drying - a minimum of 4 days.

principle of applying the epoxy resin and porcelain chips the same.However, you have to take care and find a porcelain fragments suitable in color to the enamel.They are ground into a powder and sprinkled on the applied resin layer.If necessary, the surface is embedded cleavage leveled with a spatula.This method is not the most effective, as the porcelain patch is long, and pick up the porcelain is not always easy.

much better and more durable results provide advanced non-lethal weapons.These include a sanitary putty and enamel.They can be purchased in the so-called remkoplekty.It usually includes:

• putty;
• enamel (often in the form of a spray);
• spatula;
• sandpaper to polish the finished "patch".

However, to find such a set can not everywhere, even in large cities, not to mention the remote corners of the country.For this reason remkoplekty have to collect yourself.Do not be surprised, but most often for this purpose it is recommended to go in the car shop.This is where you can find putty and enamel for repair and bodywork, which are able to withstand regular exposure to moisture, temperature changes and mechanical stress in your bath.There's a few tips:

• Choose putty maximum light color, so it does not manifest through the coating layer.
• carefully chosen color enamel for baths.It must be in the form of an aerosol, which will greatly facilitate your work and allow to apply thin layers.
• Enamel must be resistant to high temperatures and moisture!This alone ask the seller and study the markings on the packaging.
• emery paper purchase the very fine-grained.

After shopping and carrying out preparatory work can begin sealing of cleavage.

1. According to the instructions divorce (if needed) and apply a layer of putty.
2. About an hour later there is a grasp of the top layer, and you can begin to clean up the sandpaper.Do this so that as a result you can not feel your fingers on the site of "patches" or hillock hole.
3. then fills it with enamel spray.For best results, do it gradually, in several layers.
4. After it dries, use sandpaper and polish the surface of the "patch".
5. After 2-4 days (depending on the instructions), you can normally use the bathroom.

thus appeared in the bath stone chip repaired is not so difficult.You do not need special skills, just a bit of patience, time and money.