Master class for creating an electrode boiler improvised

briefly the principle of action

First of all tell you thathow it works, this type of water heater for the heating system.The principle of operation is quite simple - the coolant (in this case, pure water) is supplied to the vessel in which the electrodes - a thick metal rod attached to one of the container ends.The electrode was connected to the phase and to the outside of the housing zero conductor.When the device is connected to a network 220 V 50 Hz coolant begins to randomly move from the anode to the cathode, resulting in the water and heats the ions.That is why the electrode boilers can still be called ion.As you can see, the principle of action really is not complicated, but at the same time, the system efficiency is 96-98%, which is very high.

equipment from the manufacturer

Simple homemade improvised

So, the first thing to give to you the step by step instructions to create an electrode boiler at home, having at hand the most basic parts - a metal tube and an electrode as shownpictured .

Everything you need for making it:

• welding machine;
• pipe diameter of 10 cm and a length of 25 cm;
• electrode (suitable metal rod 10-12 mm);
• tee suitable diameter;
• clutch, which will be connected to the heating system;
• insulator for the electrode and the terminal (zero, ground);

assembly process is fairly simple and consists of the following stages:

1. on both sides of the pipe should be screwed sleeve tee and carefully tighten the product to avoid leaks in the future.
2. Place the electrode from the tee into the pipe, fixing him still inside with the help of a dielectric insulator.In this case, you can use a bimetallic radiator cap (as in the photo below), the main thing - to provide insulation between the pipe and the electrode (so they do not touch).The plug only necessary to drill a hole of a suitable diameter rod inserted therein and lock nut from the outside.
3. on the pipe casing weld the two bolts, M8 or M10.They need to connect the zero and ground terminals.Bare connection points will need to be well insulated to protect yourself from electrical shock.
4. Install homemade electrode boiler heating system.Since small size, it can be hidden even under the sink in the bathroom.
5. Start the coolant system and test the finished home-made.

That's the whole manufacturing process.The drawing of the simplest devices should look like this:

addition, we advise you to view the video review which describes an electrode tip from the owner of the boiler, which is already used by more than 6 years:

Master Class from 5 parts

Well, if you own a good welder, be sure to make an electrode boiler with his hands, observing all the tips provided below in the video course.This home-made will be more secure, reliable and efficient!

As you can see, you can make the electrode boiler itself, while not spending a penny of their own funds.The main desire and we hope that this video course you motivated on independent production!
Related items:

• How do induction boiler own hands
• How to make a metal detector improvised
• Heating garage electricity