What kinds of waterproofing materials ?

Why waterproofing?

Very often, the questions arise: "What is waterproofing, what is its main function?"The fact that the newly constructed building is able to stand for more than a dozen or even a hundred years.And so it would, but prevent the various adverse events that have an adverse effect on durability.First of all, in need of waterproofing foundation and basement.Because it is their first and foremost it is important to protect from rain, groundwater and meltwater.

particularly dangerous ground water, which rise during seasonal heave, putting considerable pressure on the home base.As a result, cracks may be formed.

It then destroys the walls of the building.Also as a result of the effect of moisture can settle on the basis of fungus and mold.Among other things, waterproofing of walls and ceilings need to insulate buildings.Thereby saving considerable funds spent on electricity.

And speaking of the roof, then it can also detect the fungus (due to poor insulation or undone).This, in general, affect the durability of wooden rafters.And they are known to have a predisposition to a rapid decay.And so in the near future will have to change the whole roof.The conclusion suggests itself: it is easier to take care once all the necessary materials and make quality insulation.

Types of waterproofing materials

The choice of the insulating material depends on the design of the building, as well as the required parameters of temperature, mechanical, moisture resistance.Also important indicator is the cost.Material can be subdivided into the following types: corrosion, antifiltratsionnuyu, plastering, painting, Charging, cast, glued Mounted waterproofing.

Speaking of corrosion, it is intended to protect the surface of the wastewater and groundwater and from aggressive compounds.By way of devices is plaster, paint, cast, injection, impregnation, mounted, Loose-fill.Antifiltratsionnaya used to protect underground facilities from water penetration (cellars, wells, tunnels, swimming pools, mines, water supply).Plaster has the form of a two-layer coating, which is applied mostly on concrete structures.

Paint, which is created from plastic, bituminous paints and varnishes, applied to metal and concrete structures.Loose-fill (for example, asfaltoizol, hydrophobic powders and sands) used as a bulk material (often for shuttering or device base).

Cast considered the most reliable and made of hot asphalt mortars and mastics.It poured for the formwork on walls or behind the wall.Glued created from roll material.Usually it covers concrete, brick walls and ceilings.Mounted: stacked plastic and metal sheets on the ground and other hard grounds.

Modern waterproofing materials

clear that all materials are selected depending on the conditions and requirements.But the question arises - what waterproofing choose?Or rather, what brands are preferred and correspond to the basic standards and quality standards?To this end, we describe the most popular manufacturers.As already mentioned, they are divided by type to the mastic sheet and roll materials (such as mineral wool), solutions, polimembrannye, film and others.

mastic most popular means for waterproofing Novokout (for roofs, pools, bridges).It is also possible to use compositions penetrating wall GSK-1 DAKO-FORCE, XYPEX. Speaking of powder mixtures, then select the brand LAMPOSILEX .From roll and sheet materials popular brands FLEXPOL .Well, as the film of the membrane should be fine VLDPE, HDPE, FRICTION.

Note!Before you make a particular purchase, consult with a specialist.Explain, for what purposes and tasks you need stuff.And only then choose from all of the proposed range.