Instructions from A to Z on the air conditioner installed in the apartment

There are many types of air conditioners for the apartments, the most well known is called the "split-system", the installation of which is below and will be discussed.It consists of 2 parts: internal - the evaporator and the outside - a capacitor, which are connected through electrical cables and 2nd copper tubes through which flows Freon.From the inside of the branched tube of plastic, designed to drain condensate.

Guide to Action: A to Z

First you need to install an external unit.Well, if you have a flat open balcony.It will provide unrestricted access to the air conditioner.If you are installing the equipment on the balcony which is glazed, while the capacitor is mounted on the outer wall of the house, in which the pre-opening proceed.Fix the outer part of the system on the surface to help secure the anchor bolts and brackets.To protect the unit from rain, erecting a canopy over it.

Before you install the air conditioner in the apartment with his hands, read the following tips:

• surface for attachment must be flat and strong;
• living on the ground floor, mount the unit at a minimum height of two meters, so that it did not target for thieves;
• when selecting brackets keep in mind that they must withstand a weight of 2-3 times greater than the weight of equipment;
• living on the upper floors, but without a balcony (loggia), climbers have to take advantage of the services (see photo below) or a car with a special ladder to install the air conditioner in the apartment with the facade.

installing the outdoor unit, drill a hole in the wall, you need to connect cables and pipes of the refrigerant, which connect the scattered pieces of a split system.Further mounted "waterproofing glass", where we laid cables and pipes.The next step is to install the indoor unit in an apartment on their own.Before denote the place where you place it, read the recommendations listed below:

• yardage between the indoor and outdoor units should be not more than seven-thirty meters (specific number depends on the model of the system);
• body that is located in an apartment must be other things (with respect to the furniture) at a distance of not less than three meters;
• not to muzzle and do not get sick, refrain from being able to install the air conditioner over the bed and a place where you are working, as well as on batteries, heaters, fireplaces, etc.

Classification of indoor units:

1. Ceiling
2. Floor
3. Wall

When installing wall and ceiling air conditioners are consolidating strong enoughbrackets, on which fix the device.On the floor device everything is much simpler: it does not need to fix, but just put on the specially designated areas in the apartment.

Important!If the outdoor unit shall stand straight, then the floor will be all the drops of condensation.Place it properly just because after the installation of the air conditioner body has nowhere perenesesh!

Next comes the process shtrobleniya special openings for cables and pipes that connect the inner and outer blocks.In many cases, Stroebe walls, ceiling, occasionally - floor.If this process is difficult for you, then simply lay the communication box of plastic that will not break the interior of the apartment.

Combining units of cord and pipes, use fittings.Tubes with Freon smoking untwist in the joints and bend 2, 3 or more times.Be sure to drain hose proshtrobite own backbone in order to take the condensate from the indoor unit, for example, on the street.Combining system vakuumatsiyu provide communications to eliminate them from unnecessary moisture and air.This process is performed only with special equipment.Next, you need to think about a separate power supply for the air conditioner in the apartment.To do this, the instrument should be hold concealed wiring (in Stroebe), and in the distribution board need to install a separate machine.Cable placed in Stroebe.

Check if you got your hands at home to make installation of the air conditioner.To do this, use a certain test program that is activated when you first turn on the device.A positive result is when the technology will function well without vibrating body.

In this article, we have sounded easy to understand instructions and provide video and photo, which explains clearly how to install air conditioning in the apartment or office on their own.In general, the installation of such a device - troublesome and responsible.If you miss some of the instructions or make a mistake, you can just lose expensive equipment, or spoil the repairs, which has already been made.

Also read:

• How to choose the air conditioner in the apartment at
• Square How to Make USB fan with his hands
• How to become an electrician from scratch