Build Daily

Bathroom

August 12, 2017 18:05

PVC panels for bathrooms

click fraud protection

Content

  1. Advantages of PVC panels
  2. Preparation bathroom to
  3. finishing Tools for installation of PVC
  4. panels Video finishing bath panels PVC

Contents

  1. Advantages panels PVC
  2. Preparation bathroom to finish
  3. Tools for mounting panels PVC
  4. Video finishing bath panels PVC

Sheet panel PVC (from polyvinyl chloride) are considered the most convenient and practicalmaterial for the bathroom.Thanks to them, the walls and ceiling can be carried out easily, quickly and with little or no dirt.An important feature of such material - preparation of walls for repair is required.Variety of colors allows you to create any design bathroom, in this you can see by looking the photo below.The standard size panels up 270smh25smh1sm.

Advantages of PVC panels

has excellent moisture resistance, this material does not become wet and are not subject to deformation.Due to the fact that PVC panels have special locks, the installation is formed continuous web, looking at

photo you can see this.As a result, moisture can not get inside their cavity. advantage can be considered and their costs, for example, 1 square meter of panels is much less than a square meter of ceramic tiles.

following advantages - this range of colors, which allows you to create any design in the interior of the bathroom.For the same thickness of panels of different colors can be joined both vertically and horizontally.This material may be called many more advantages: it is durable, and wear resistance, and ease of assembly, and more.

Preparation bathroom to finish

primarily at repair is necessary to make a detailed plan of the premises, where there will be lockers, hangers, hooks, sockets.In such places it is necessary to install additional stops to them to fix bathroom accessories, rather than plastic.Walls before finishing must be primed, which prevents the appearance of mold and mildew.When high humidity can put a forced ventilation.

Tools for mounting panels PVC

1) screwdriver.

2) Ruler and pencil.

3) A knife for cutting the panels.

4) building level.

5) Metal or plastic guides.It is strictly forbidden to use wooden structures, as a result of ingestion of water panels such profile can swell and deform.

6) Screws with press washer.

Video finishing bath panels PVC

At the beginning of the process of finishing the walls of the bathroom need to attach the guide profiles at a distance of 50 cm from each other, and the ceiling - in a perpendicular position to the wall, just like in the video .Next install edging profile U - shaped type ceiling and wall using screws 25 mm in length.It is necessary to hide the irregularities of undercutting plastic.Profile is attached to the end guide.The next stage of repair goes fixing angle profiles for connecting panels at the corners of the bathroom.Installation can be started from any edge of the wall or ceiling, with special attention paid to the fact that the first sheet is correctly entered into the edging profile.Fixing to the guide comes with self-tapping screws with a press washer.During the installation of pre-prepared holes for light fixtures, outlets, pipes.End panel always much smaller, it is necessary to trim it to 3.2 mm smaller than the remaining free space.

final stage lining the bathroom is next.In places where the clipped part of the panel is glued T- shaped profile, with a pre-inflicted sealant.For a better finish the bathroom after the installation of the panels must be installed additional elements: plinths, moldings, plastic corners.

instagram viewer