Installation of acrylic bathtubs with their hands

Many are interested in such a question, how to install acrylic bathtub.The process of installing any plumbing - it is extremely responsible, since even minor deviations from the required standards can affect the final product life cycle.If done correctly, the bath can last for many years.

First of all, for you will need, of course, herself a bath and accessories to it: legs, hooks for attaching to the wall, two mounting brackets.

Step by Step Installation of acrylic bathtubs

begin with, that attach the mounting brackets with screws to the bottom of the bath, as shown in the video.To do this, we turn over the bath bottom up, from top to put on her strap, and make the appropriate markup to know where to drill the holes.

Then remove the strap and make indentations in the surface of the bath.Drilling should be shallow, sinking no more than 5 mm.

Installation of acrylic bathtubs - responsible process, so in order to avoid damage to the acrylic surface still needs to be done as carefully as possible.Next, fasten the mounting brackets to the bathroom screws and straps to attach the ends of the legs.

screws and other parts should only be used from the corresponding set, which is designed for the parameters and the thickness of the concrete coating bath.Screwed screws should be in a thickened portion of the bottom of the bath.

next step: installing baths directly on location.At a suitable height from the floor to drill holes in the walls, hammering dowels and fasten the special hook, again, with screws.

Installation corner acrylic bath is made by planting these hooks - thus ensuring the most reliable and durable fixation.

Check the bath stability, as shown in the photo, as well as its horizontal position with the help of a spirit level.If the design has some mobility, even a little, you should make the final calibration of the height by adjusting the legs.

are installing acrylic bath on the frame, and do not forget about the installation of the drain trap.If the items do not coincide with each other at least a few millimeters further possible water leakage and, consequently, problems with neighbors.

As is known, acrylic, as well as steel, retains heat poorly.To bath cools down so quickly, it can be immersed in a kind of "Thermos", consisting of a thin layer of foam, which covered both the bottom and the sides of the bath.Silicones can be repaired and all gaps between the casing and the walls of the bath.

When deciding install acrylic bathtubs with their hands helps both personal experience and professional advice.Different bathrooms there are some nuances, and that successfully managed to put a bath the first time, does not mean that the same will happen in other cases.

One of the basic requirements that must be met prior to installation - the completion of all repairs and finishing works in the bathroom.Walls should be plastered, leveled floor, tile laid.

for a final check of work performed on the stability and integrity should dial the water in the baptismal font and wait for some time.If there are no leaks and other negative phenomena, acrylic tub installation can be considered successful.

Video installation acrylic bath with his hands