Build Daily

Faucets

August 12, 2017 18:06

Spare mixer : types, selection of parts for the bathroom faucet

click fraud protection
Spare parts for mixer
  • Forms components
  • Rules Parts selection
  • Kit
  • What can be repaired by yourself?
  • When necessary to apply to the master?

believed that a good understanding of the construction of the sanitary equipment only needs a professional plumber.An ordinary man in the street needs to know only the most basic things, like how to change a gasket in a dripping faucet or clean the clog in the pipe.However, knowledge of the structure and function of certain plumbing fixtures you able to do a good service in case of need.Simple to repair damage to the sanitary equipment, you can save money on the plumbing and rid yourself of often long waiting professional help.In this article, we will tell you everything you need to know about the design of the mixer and its spare parts.

Mixer with shower

Forms components

Typically, bath mixer, sink or kitchen consists of:

  • aerator - nozzle to the crane, which generates a stream of water, limiting its consumption;
  • spout - actually "tap", which implies a jet of water;
  • one or two valves - pens, with which is driven by the mechanism of the mixer;
  • two crane-Books or cartridges - devices designed to start or shut off water flow.

design single lever mixer is somewhat different.Instead of two valves is a lever which adjusts the pressure and temperature of the water.Instead, the crane-Books set ceramic cartridge.

Aerator mixer
Diverter mixer
Head parts for mixers
Cartridges for mixers

Rules Parts selection

choosing parts of the mixer have to be especially careful, because at the present richness of choice, presented on shelvesplumbing shops, and it is easy to get confused.

  • aerator needed, including to a jet of water enriched with air and was more pleasant to the touch.Aerators made of plastic and metal.It is believed that plastic aerators are more durable and better able to cope with the task of mixing water and air.Metal parts as experts admit less reliable.In addition, you need to consider when choosing an aerator diameter and thread type - these parameters must match the spout.
  • Spout mixer rarely exposed to replace, as is usually better to buy a new mixer.If you still decide to limit ourselves to only the replacement of the items, when you buy targeting the quality of the materials from which it is made.Obviously, the higher the quality of the product, the longer it will last.Choosing a faucet spout, you might encounter with a variety of models, which differ primarily in length.Long spout takes up more space, but allows you to easily wash the dishes in the sink or wash your hair.Short mixer is more compact, but it is better to use only for washing and hand washing.
  • mixer valves rarely fail and, accordingly, to be replaced does not need.More often malfunction tap rooted in the failure of one of the crane-Books.These parts are made from ceramic and metal.Ceramic head parts - a more modern version.They allow you to save effort, run more smoothly, but, in case of breakage, this item will not be repaired and have to buy a new one.If your house is hard tap water or you notice an impurity of sand, you should refuse to buy ceramic head parts, as they are quite sensitive and poor water quality are easily damaged.
  • head parts of the metal with rubber cuffs, to be replaced in case of wear.To open-close valve, you will need to make a little more effort.Rubber pads that are consumable, are quite inexpensive.Change can be a matter of minutes.Despite the periodic need for minor repairs, metal head parts are considered more reliable.

When selecting the visible parts, should pay attention not only to build quality, but also the appearance, to match the color and style with the rest of the mixer.

Spout mixer
Shower hose
Set of hoses for the mixer

Kit

In order to be able at any time to perform minor repairs of the mixer, you should always have on hand the necessary supplies.Replacement parts for the mixers are sold at hardware stores often set, which is called "Kit". Usually this set includes:

  • rubber ring spout - the gasket that fits over the base of the spout;from many corners of the crane left and right, it wears away with time;
  • retaining ring spout - O-ring that seals vodozaporny mechanism;
  • valve head gasket - usually the kit includes two pieces;
  • locking gasket - rubber sleeve that fits over the metal head parts;
  • washer head valve - metal fasteners, sealing vodozaporny mechanism;
  • laying return valve;
  • laying eccentric ;
  • bolt - iron hardware size 5x8;
  • water pointer button - removable plastic lining of red and blue colors.
Repair kit for mixer

What can be repaired by yourself?

repair the mixer can be made with your own hands if:

  • revealed mechanical damage to the spout or valve - cracked and chipped can be treated with a sealant for sanitary fittings;
  • broke cartridge single lever mixer - in this case you just need to replace the spare part;
  • worn gasket - here you will come in handy set of seals repair kit;
  • clogged aerator - the item should be washed with a strong jet of water;
  • not work mode switch bath-shower - in which case you need to replace one of seals.
Repair their own hands mixer

When necessary to apply to the master?

In the case of a serious problem it is better not to experiment, and to seek help from a professional, as to repair the consequences can be very serious.It should be noted that the mixer failure in severe cases is not true of professional help in this situation, you may need only if you have absolutely no time or lack the most basic skills in minor repairs. Calling plumbing advisable in the following situations:

  • need to install or replace water meters;
  • requires installation of water and sewer pipes;
  • burst pipe;
  • formed blockage in the pipes;
  • needs repair or installation of the heating system.
Repair faucet in the bathroom master
instagram viewer