A fence made of mesh netting with his own hands

Today, with all the variety of fences, little what type of structure would be able to replace the fence of mesh netting made with their own hands.

Benefits fence of mesh netting

Installation Methods

fence of mesh netting with his own hands can be set in two ways:

1. Neutral , as in the photo above, when the grid is stretched between two supporting pillars.Such a method is much cheaper and easier.Recommended for use when in front of him is not intended to pursue the perfect appearance, and only need to quickly and cheaply to install a fence.

2. Sectional , as in the photo above, when made ready fence section in which a fragment of chain-link fencing is fixed.This method more expensive procedure, as is necessary to get a metal corners, which price higher than the net, but the fence itself will be much more attractive and more practical (eg, on top of the fence will be put up rug, something to dry, etc.)

materials

for mounting such barriers, we need the following materials:

1. Metal poles 50h50h2h3000 mm;
2. Rabitz (not galvanized, galvanized or plasticized);
3. Fasteners (nails, galvanized bolts);
4. Concrete M200.

Step by step instructions for installing the fence of mesh netting

So, how to make the fence of mesh netting with his own hands?

I. Marking the territory.

Getting started with hammering pegs in the corners of the site and pulling the strings between them.Measure the length of the lace - is the length of the required mesh netting, also need to take into account the + 5-7% extra length "in reserve".Then mark up space supports optimal step 2.5-3 m.

II.Setting columns.

In the event that after the construction of the house is left sufficient number of wooden beams or other material that can be used as future supporting pillars fences;when the price of "forest" in your area several times cheaper than the metal profile, well or you need a temporary fence - then you should use that timber supports.The surface of a wooden beam must be free of bark, and it is desirable to treat with antiseptics and waterproofing mastic, which will protect the material from rotting and vermin.Pruning should be the pillars of the calculation of the desired height of the fence, as well as the depth of the base-Ground (pit should be more on the 100-150mm on the depth of soil freezing, therefore, if the count on six-foot fence, and the depth of freezing ground 800 mm, the height should be prepared in 3 columnsm). But such support does not stand for a long time, so it is best to use metal poles!

If you decide to build a profound and durable fence - take care of the purchase of the metal pillars.Installing such supports requires concrete foundation.Concreted pit depth should be 1/3 of the height of the fence.For example, if you are planning to put a fence height of 2 meters, the depth of the pit should be at least 1 m (it should also take into account the depth of freezing and heaving soils).

III.The stretch mesh netting.

By wooden base of the fence is more convenient just to beat grid with nails.

For metal posts, welded hooks are recommended initially, which then will stretch mesh.

sectional fence of mesh netting with his hands

The main difference of this method from the usual is the presence of the frame.

for mounting sectional fence of mesh netting, we need the following materials :

1. metal poles 50h50h2h3000 mm;
2. Rabitz galvanized or plasticized;
3. Corner metal bent 40h40h3
4. mm metal rods and bars for welding
5. Concrete M200

Layout and installation of pillars sectional fences, netting does not differ from its simpler counterpart, but with welding scaffolds have to sweat.If you do not have good skills of welding, it is best to consult a professional.

planning section, do not forget that you need to do them at 100-200 mm shorter than the distance between the fence supports and 100-150 mm above ground level.

mark and cut the mesh size welded rectangular uniform stretch it on the frame and put it on top of metal rods weld all into a coherent structure.

finished sections are fastened to the posts by means of welding strips.

For clarity, be sure to check with the photo and video instructions for the construction of the fence of mesh netting with his hands.

Photo fences from Rabitz

See photos of fences from Rabitz, hand made

mounting fence Video of mesh netting with his hands

Watch the video how to make the fenceof mesh netting with his own hands: