Build Daily

Fences

August 12, 2017 18:05

A fence made of slabs with their hands

click fraud protection

fence construction - an indispensable part of garden landscaping or home country.The use of wood for the construction of the barrier - a way to create a beautiful and environmentally friendly design.And if you make a fence of slab with his own hands, you get more and save considerably.Because the cost of such material is much lower than that of the board, and look even more interesting.

Content

  1. Features material
  2. preparatory stage
  3. mounting Features fence of slab
  4. Useful tips
  5. Videos fence construction of slabs with their hands

Features material

croaker called extreme board for longitudinal sawing logs, which on one side is convex.This poor quality timber, bark, the cheaper it will be, the more knots on it.One side of his smooth, and the other semicircular.Most often, croaker take for kindling, but it will turn into an original piece by skilful approach.

bark is better to remove, so as not to provoke rotting.However, if it is not clean, you can make a fence, stylized ancient gorodbu.If you decide to treat the surface, and the need to ax grinder.As a last resort, use an ordinary shovel.But grinder gives better results.The treatment can be carried out at the sawmill.But the work done in the home, save money.

the final stage of preparation for the construction work will be handling special gear that will protect the wood from the effects of the atmosphere and insects.It is desirable to toning preparations, it will significantly improve their external qualities.These works are carried out after drying slab from which the bark is removed.

preparatory stage

the preparatory phase is prepared not only the croaker.It is necessary to take care of the other components, without which it is impossible to build a fence.

  1. supporting pillars (square or round tubes).
  2. Sleepers (metal joists).
  3. rope.
  4. Screws or nails.
  5. Spade.
  6. Materials for concrete supports.

mounting Features fence of slab

first pit dug for the installation of the supporting pillars of the depth of 1-1.5 m (depth of soil freezing).It is better if they are made of metal poles.The standard distance between supports - 2.5 meters.For the strength of the pillars not only buried, and strengthened by a concrete solution.Between the fixed supports pull rope or thread, to determine where the guard is itself.This method eliminates the irregularities.

How exactly do the fence of the slab depends on the owner.Boards can be mounted vertically or horizontally, with overlap or gaps.Only if you decide to do overlap, it should be remembered that the board must find one another no less than 2 cm, because the material dries out over time by about 1.5 cm. In general, the fantasy here is not restricted.Submitted photos and videos to help choose the best option.

Sometimes this material is combined with the other.For example, the wooden fence of slab set on a stone foundation, brick mounted between the supporting pillars.It is possible to use other variations.

Useful tips

to the fence to give of croaker pleased than a dozen years, it is necessary to observe the following recommendations:

  1. too wide boards should be avoided, eventually they will go cracks, it will spoil the appearance, reduce the strength of thestructure.
  2. supporting pillars need to deepen the depth of soil freezing.
  3. gable roof over the fence strengthen rural flavor will give the construction of the old look.In addition, this is a good technique to protect from excessive moisture.

fence made of conventional slabs, will be a kind person at home.After all, such material is not so often used for fencing.He looks no worse than that of other materials, and the cost is much lower.

Videos fence construction of slabs with their hands

instagram viewer