Replacing the seal on the plastic windows

windows recognized as the most economical and reliable in the heat preservation issues.Helps to ensure the safety of the heat in the house special seals are located around the perimeter of the window frame.Timely replacement of the seal on the plastic windows ensure no drafts and lowering the temperature in the room.The process of this work is fairly simple, but requires compliance with the sequence of assembly operations, as well as the care and accuracy.

of work stages

The first thing to do - is to inspect the technical condition of existing in the seal box.It is a certain relief harness section, made of the most durable, heat-resistant materials.

Initially, the seal has a relatively high operational performance.For example, the rubber seal of the German production does not require replacement, and will regularly perform its function for 8 years.Slightly smaller lifetime is the seal of the Russian manufacture.

Even the smallest cracks in the surface, the more holes, damage, places of poor connections with the surface of the window frame indicate the need to perform a repair of plastic windows and replace the seal as soon as possible.

choose the desired view of the seal under your profile window, you are ready to install it.They are divided into two groups, and on the window frame at the window sash.Quality seal replacement involves replacing both types simultaneously.

You can get acquainted with the process of replacing the seal on the plastic windows, if you look at photos of the repair work.

1. Start installation work is necessary, after removing the window sash from his seat.Make it is not difficult: tightly close the handle, remove the canopy from the upper exterior trim, knocks the core and remove the frame.Now the window is fixed only on the lower canopy, from which it is easy to remove, only slightly raised.

2. Place the sash window to the floor (or bed) and get out of your seat damaged rubber seal.Suffice it to pick up the edge and he goes free.In the area of ​​the upper hinge mounting need a little lift, because this place is the mount seal retainer.Actually, for this and the window was removed necessary.

3. Clean or wipe the dust from the hole vacated, all kinds of pollutants.

4. Place a window slot in the new seal similar to the previous around the perimeter of the window frame.Do not pull the rubber seal, asas a result of temperature fluctuations tires supplied compression / stretching, which could lead to rupture of the seal whole harness.

Now you must replace the seal on the window frame.The work plan is the same:

• remove material wear;
• protects the seat from dirt;
• insert harness new seal in the appropriate place.

See how professionals perform replacement of the seal on the plastic windows on the video - it is an opportunity to understand the process thoroughly.With this training session, even far from the repair person can cope brilliantly with a window warming his house.

Video replace the seal on the plastic windows