flashing

waterproofing - insulation of new generation material that is widely used in many areas of construction activity.Classify this material can be surfaced to the class.

is made of oxidized bitumen is produced in rolls.Used primarily for roofing works (mostly used on flat roofs);It is also used for the realization of joints and junctions of surfaces.It has high moisture-proof property.But the possibility of insulation and the walls and floors of industrial premises, garages, etc. It is now clear that such flashing (see. Photo, video), then define its characteristics.If you read the reviews of the waterproofing, we can see that people in general are very pleased with the cover, as it is durable and does not require constant care.

For the production of the material used the so-called glass fiber, special.the fabric and the basis of the combined type.It should be noted that all of these bases do not rot and biodegradation by microorganisms and insects.On fiberglass mesh bituminous coating is applied - resulting in a waterproofing sheet which is then wound into rolls.

Species

are two main types: P and K. The first is used for the lining of the lower and the second upper layer waterproof carpet;have slightly different characteristics, so it is recommended to use every subspecies of the material strictly according to the prescribed destination.Only maximal protective effect can be achieved in this case.

Specifications waterproofing

First of all pay attention to reliability, which is very high.Materials such as roofing lose.As a consequence - high durability, commonly called numbers - 8 to 11 years.Also note the high biological resistance - insects, mold does not destroy the structure.Furthermore, the material is safe and nontoxic, although suitable for use outdoors.An important advantage that the coating inexpensive and can be used in the construction budget for the skin.

can not ignore the fact that the waterproofing is quite easy to install.It does not require special skills of workers.Instruction is very simple.After installation, the material does not come off, he is not afraid of the wind, as a fairly well-limes and pesters the surface of virtually any invoice (in spite of this, the surface is recommended pre-treated).We consider in detail the process of laying.

Laying waterproofing

Placing is as follows.First you need to clean the surface, to make technological processing, to clean (remove debris, dust, dirt).Next, the entire area is treated with a solution of a specialized, the most commonly used are: bitumen sealant or primer.Next, fit the base, you need to do it to the utmost care and attention.For further installation will be necessary gas burner or the like. It is through her going fusing waterproofing.There is a definite statement, describing in detail each of the above points.It is recommended to use this technical manual.

Finally we can add that it is recommended to keep the material in accordance with the rules, that is - away from heat sources, hot batteries, pipes, etc. The rolls have to be laid out evenly and not put pressure on each other...

Video