How to make the design of the drywall ?

Drywall is a modern versatile building material for the construction of various types of arches, passages, niches, designer ensembles, build walls, ceiling finishes, and much more.As a building material it exhibits excellent performance durability, resistant to damp environments, eco-friendly and non-flammable.All these qualities make it widely used in the construction of any type.

Benefits drywall constructions

drywall constructions have the following advantages:

• are lightweight.The light weight of both the leaf and the frame makes it possible to build walls between the rooms on the ground, under which no pillars;
• mount Easy.To create any design of the drywall does not require professional skills.It is enough to have an understanding of geometry and have the ability to solve simple examples.This will be sufficient even for complex arches with niches and transitions;
• Construction of plasterboard to hide lementy plumbing, electrical wiring, unnecessary niche.At the same time always turn perfectly flat and smooth surface.

How to make plasterboard construction with their own hands?

Before you begin construction of the planned interior element, it is necessary to think thoroughly on the project.It is necessary to take into account all the little things that can interfere with, and which will complement the future interior.

• first step is to take a piece of paper and make initial sketches of your thoughts.
• Next, to create designs of plasterboard with their hands need to take a tape measure and make measurements with an indication of the results on the plan.Also at this stage it is necessary to make the wiring layout of the wiring for the lighting and household appliance, if the installation of such planned.
• If a firm foundation and requires no preparations, you can move the layout of the paper on the wall.If the construction is built in a free space, then it must be applied to the layout and main attachment points of ribs on the floor and ceiling.Thorough project throughout the construction at this time should already be fully prepared.
• Installation of drywall constructions starts with the choice of material for the construction of the base frame.As it can be wood or metal profile.Here, the designer selects the preference to that which has more experience.But keep in mind that the tree dries slightly changes its geometrical parameters.This, in turn, will lead to the appearance of cracks on your masterpiece and stakes.
  

  column Making drywall

Especially popular are the construction of the drywall on the wall.Because the use of this material is possible to construct a fireplace, beautiful arches with niches, making intricate passages, stairs and columns for the subsequent decorative plants.

Widget from SocialMart

All created design with their own hands Plasterboard require maximum attention and the desire to get excellent results.

• draw the first thing on the paper.Choose the shape, design;
• Next, using a spirit level and a tape measure Measure out its position on the wall.It is necessary to take into account the thickness of the sheet of drywall on all sides of the niche of the future;
• Niche is a recess in the wall, so to create it, it is necessary to shorten the space by an amount equal to its depth.If it is performed in the wall itself, it is necessary to gouge respectively;

• Mounting of constructions of plasterboard begins with UD-profile fixture to the floor, the walls on the sides and the ceiling.But it must be applied to the layout.Here you can use the plumb line.Retreat from the wall an equal distance in the two extreme points, if it is straight wall and transfer the marks on the ceiling with a plumb.If the trajectory is curved, it is necessary piece of wall to divide into equal lengths and markings applied in their endpoints.In this case, used to carry gypsum board walls to 9 mm thick.It is not covered with a layer of cardboard and reinforced with fiberglass, which, strictly speaking, and gives it flexibility.Profile, you can give the necessary form by its notches equidistant scissors or a grinder.Then it is necessary to gradually bend to the desired radius.To get the bend in the opposite direction, you must make the same item and attach it in place, expanding the previous opposite.And so on.
• After transferring the markup you can start assembling the structure for plasterboard.Fasteners UD-profile carried out by means of anchors or dowels at intervals of not more than 50 cm Further, he set the vertical supports, which are fixed to the horizontal profile with screws or rivets.;
• After mounting the main structure must be attached to the wall at the marked pre-cooked pieces of profile for a niche.Also mounted transverse structural members are ribs and railing for attaching drywall.

Creating a niche in the wall

can perform a variety of drywall construction on the wall for this, just need imagination and desire.Especially since a lot of ready-made solutions can be found on the Internet, with detailed descriptions and photos.With this finishing material as drywall, design can be very different in form and complexity of construction.Read more in detail how to make a niche in the wall of plasterboard.