Build Daily

Miscellaneous

August 12, 2017 18:06

Balcony with the removal of their own hands

click fraud protection

When carrying out repairs on the balcony, you can take this opportunity to extend its usable area.To do this it is possible to build a balcony if the removal of the hands.Larger space will allow for greater comfort.

External balcony on the top floor

External balcony on the top floor

main advantage remodeled balconies - a wide window sills, which can be cumbersome to put pots of flowers.But before they took the usable area.In addition to this, there are several advantages that make outrigger balconies so popular:

  • The empty place, you can easily construct a built-in wardrobes and there is room to place flowers on ampelnye supports.
  • large width of the sill can be grown on them, not only flowers, but also the seedlings with enough light.
  • the presence of the balcony consoles rope for drying clothes, they can be moved closer to the window, freeing up even more space.
  • bearing structures loggia or balcony very well amplified, which has a positive effect on safety.
  • overall light level increases markedly.

In addition, with proper and thoughtful approach to the design registration facilities, external balcony will be beneficial to stand out from the rest.

In what order should perform all work on the removal of

balcony work should be done in a certain sequence.If you decide to carry out the entire procedure yourself, you should read some of the intricacies of the process.

The first thing to draw the layout of future construction paper, calculate all loads and perform planning calculations:

  • necessary to determine the size of external design balcony.
  • Make the choice of material for the floor and roof.
  • defined with the necessary number of windows and their appearance.
  • Properly consider all options for warming the surface of the fence and stop at the most optimal.
  • decide on the option of finishing the walls, floor and flow.
  • Decide how heating and lighting will be installed on the new balcony.

calculation length of the profile, which will be used for the construction of remote structures is impossible without first performing a drawing with all the details.For this purpose is required to hold the parapet length measurement given the size of the side fences and the existing gaps between the beams.Determine the need and the length of the struts of the future.The resulting number is multiplied by 2 and get the necessary number of the profile.

frame scheme of the balcony with the removal

scheme balcony frame with the removal

production welding

At the first stage construction of the frame and securing the remote balconies.There are no problems in this matter, if you live on the first floor of the house.In this case it is possible to arrange a screw piles, which are set directly into the ground.The whole balcony structure can be built on most of these piles.For the construction of the remote balconies on the upper floors of the whole framework will have to mount directly to the wall.This will allow them to carry on the burden of the balcony slab.

Welding frame for balcony with removal

frame welding to the balcony with the removal

walling the loggia or balcony is made of profiled steel angles or pipes.Measure out two blanks from the profile To the long and short sides.Old metal structure must be dismantled.Leave only need to carry the uprights.Cut the old frame, you can use grinders.New items put to the place of attachment and welding welded.In the same way set the remaining parts of the structure around the entire perimeter of the balcony.

horizontal and vertical elements of the entire construction process needs to be controlled with the help of a spirit level and plumb.If there is any deviation, it is necessary to correct them at the stage of welding.Otherwise this would be further problematic.Perform welding work must be in full compliance with fire regulations and safety.If you are not very well managed with the welding machine, it is better to entrust this work to professionals because the quality of weld seams - the key to a safe location on the balcony of the future.

Once the frame is welded, it must be installed on the jumper equal length width future sill.Jumpers also welded on the level.To secure the construction of the wall by special strong anchors.When the frame and all jumpers to it fully installed, you need to clean all welds and paint them solid primer, which is suitable for outdoor use.

construction of the roof and windows of

As the roof of the balcony is best to use a soft material, because it has better noise absorption.An example is the bituminous slate or soft tile.The frame for a roof made of the same profile in the shape of the visor.To this end, several sealed bearing trusses in the form of right-angled triangles that secure anchors to the wall at the desired height.Between a farm connected bar and arrange crate of bars 50x100 mm.If the roof is soft, the crate should be solid plywood.In order to somehow reduce the noise of the rain can be laid under the roof sound insulation material.

Roof - visor for balcony

roof-visor for the balcony

next phase - installation of double-glazed windows with ebbs and peaks.They are designed to remove moisture from the windows.The tide must go to their edge at least 15 cm beyond the edge of the balcony.This will strengthen it more firmly under the window frame.As glazing for external balcony, you can use any windows.It can be made of metal or aluminum windows with hinged or sliding doors.glazing type also depends on the functional purpose of the balcony.If it is warm, they should be double or triple.When protection is needed only from rain and wind, will be enough and single.Remarkably will look and type of frameless glazing.

work on warming the balcony

If you want your balcony was warm all year round, it will need to insulate.In addition, the need to install balcony such HVAC devices.Thermal insulation made using foam, polystyrene foam or mineral wool.Since the frame structure presented for some distance beyond the level of the standard balcony, this space could easily be filled with insulation.Over it make any finishing finishing materials.For warming the floor joists are laid on the slab of wood blocks between which lay the insulation.Paul lay on top of a log.At the same time there may be further provided an electric floor heating system under the topcoat.

finishing

Finishing involves not only the lining of the walls, floor and ceiling, but also the installation of communications and wiring.All this can be hidden inside the frame under the false walls.Sheer finish can be made with the help of drywall, paneling, plastic panels and other common materials.

Finishing work

finishing

In general, external balcony may have a volume of about 15 - 20 percent more than the standard.In this area it usually remains the same sex.It is visually expands the space, giving more light and air throughout the space.

instagram viewer