septic Triton

All varieties Triton septic tank designed for wastewater treatment in areas where connection to central sewer is impossible or impractical (eg, in suburban areas).The use of a septic tank is most appropriate, rather than the construction and operation of a conventional sump - a relic of the past years without complying with basic sanitary and hygienic norms.

device septic tank Triton and operation

What produces septic tank?

material from which made the working chamber septic tank is double profiled plastic.This material is the least susceptible to rotting and corrosion, very durable, rugged, sealed and easy.Warranty service life of more than fifty years.Depending on the volume of the septic tank wall thicknesses range from 18 to 40 mm.

device septic tank

Septic consists of special modules, each of which is divided into two chambers.In each of the compartments of the process of cleaning the drain water.The cameras are connected to the overflow pipe.Another outlet is located on top of the container for an emergency septic tank filling.Modules septic tank is mounted on a kind of pillow of sand and concrete, and the unit is fixed shroud cables.Modules interconnected by overflow pipes can be from one to three.

The principle of septic

In sewer pipes, tightly connected to septic tanks, drains fall into the first chamber.Here there is a settling of waste process (primary degradation without access to air, ie, anaerobic), in which the heavy particles sink to the bottom, forming sludge, and is easily lifted to the surface in the center of the clarified water collected.According to the overflow pipe these waters flow into the second chamber, where they are further purification.After that, the pipes, bypassing filters, (optimum length and a half meters) plums served on the filtration field, where there is their final treatment and discharge into the ground.

advantages and disadvantages of a septic tank Triton

deficiencies among septic Triton is slowly released upholding drains with a large volume discharge.That is, in private homes, where resides more than five people, like wastewater treatment systems are not too comfortable.

Virtues also much more:

1. - septic material allows it to operate year round without fear of frost;
2. - septic Triron financial benefit;
3. - easy to use and are non-volatile;
4. - thanks to the low weight of the installation does not require lifting equipment and installation is possible with your own hands;
5. - septic Triton reliable and durable even during long periods of time;
6. - septic tank cleaning is carried out extremely rare (one to three times per year) using fecal pump or resorting to sewage truck;
7. - septic tanks produce various sizes, including individual orders.
8. - in addition to the direct appointment of a septic tank Triton can be used to store liquids.

installation process step by step

1. Roy pit.To do this, you need to measure the parameters of treatment and septic cameras dig a pit, as measured, leaving a margin of twenty to thirty centimeters on each side for stage backfill.To facilitate the process, during the excavation pit for the septic tank is advisable to use a large amount of special equipment.
   

   process of digging a pit for septic

   

   sample dug pit under septic newt

2. Device "step" under the concrete pad.Step height should match the thickness of the concrete pads, and step width equal to about 25 cm. In step stack of wooden planks, and the ground on either side of the place where the septic tank is located, stick with weld metal corners on them rings for fastening retaining ropes.
   

   steps Create a concrete pad

3. concrete pad consists of aggregate (sand and gravel) and cement (one third of total).First, poured filler, followed by cement mortar, leveling and compacting it.
   

   process of creating a concrete pad

4. Before installing a septic tank is necessary to check its integrity, ensure that there are no cracks or damage.Drop-ins on a concrete pad and attach it to the metal shroud cables rings.This is necessary to secure the septic tank at the rise of ground water level.Connect the septic tank to the sewer pipes.
   

   process of installation of a septic tank

5. Getting backfilling.Hollow chambers during filling should gradually fill with water to an external pressure chamber walls are not deformed.The mixture - 1 part cement and 5 parts of sand.This dry mixture is poured into the space between the walls of the pit and septic tank periodically compacting it.The water level inside the level must be above a fill mixture of about 20 centimeters.At the end of the process is supposed to be a septic tank completely filled the inside with water and strewn with sand-cement mixture from the outside.For aesthetics leave on the surface of the throat with a lid.
6. 
7. top of a septic tank, it is desirable to insulate, put a layer of foam, and then fall asleep ground.
   

   Warming septic newt

This scheme is suitable for the installation of septic tanks of any size Titan.The lineup includes such species as:

1. - Triton-micro (used to clean waste water from baths and houses, where the volume of waste does not exceed 150 liters);
2. - Triton-ED (septic tank module is divided into two filtration fraction can be vertical and horizontal, and the amount depends on the buyer's needs);
3. - Triton-N (for the accumulation of waste and their further utilization in the drain station without purification).

In conclusion, we advise you to read about the septic tank out of cubic own hands, as well as about the septic tank of concrete rings.