Instructions for replacing the electrical plug

broke me europlug

If you oplavilas electrical plug or broke one of the pins, replace the technology is as follows:

1. Cut away a euro, you want to change and remove the outer cable sheath (about 5 cmfrom the end).
2. We clean all 3 strands 15-20 mm.About how to properly remove the insulation we described in the relevant article.
   
   
3. twist the strands and prune them so that the remaining 10 mm of exposed wire, which is enough to change the plug by hand.
   
4. For better contact with pliers bend the ends of copper, as shown in the photo below.
5. And now the most important thing - the connection wires.As a rule, the cord to connect the washing machine, refrigerator or other household appliances has 3 contact: blue - zero, yellow-green - ground, the rest - phase.To properly change the plug with your hands, "the earth" to be connected to the central terminal, the remaining two to the pins, then the polarity is not important.
6. Next, clamp the cable (it is) a plastic jumper that will fix it in the seat.
7. At least going europlug body, which is fastened with one screw.

Video tutorial for replacing:

That's the way you can manually change the plug on the wire.As you can see, the instruction fairly simple, especially on photo examples of each replacement step was discussed in detail.

How to replace the power plug of the old?

If you have an ordinary Soviet electrical plug you want to change and at the same time in the house wiring without earth, replacing the method is slightly different, namely:

• To begin, cut the power plug of the failed housing and disassemble the serviceable items.
• As in previous instructions, remove the outer shell of the wire, strip the ends of 15-20 mm and bit superfluous.
• Since the structure of a conventional fork is a little different - in particular, the method of fastening lived, make the ring of the stripped ends, as shown in the photo below:
• 2 Connect the conductor to the plug, not paying attention to the polarity.Please note that if you have a 3-wire cord, yellow-green should be cut becauseits nowhere to be connected.
• Then hold the plate and collect the body.

Visually see how to replace the plug, you can video instructions:

That's the way you can to fulfillreplace the plug.As you can see, the most important caveat - correctly connected wires, if they 3. You need to know the standard marking of wires by color, so do not be confused.Hopefully, you now know how to change the plug on the wire with your hands!