Warming of the wooden windows for the Swedish technology

To date, not all people have the funds to change the wooden windows on metal and plastic.But what to do in this situation and whether it is possible to do these windows more airtight?In fact, there is the opportunity to warming of the windows on the Swedish technology, which will help, though not 100%, but it is essential to protect the premises from heat loss.

What is the method of insulation of windows?

Today Swedish Technology insulation wooden windows is the best remedy than insulation of wooden frames with the help of available tools.Using this new method is not required to seal the gap with adhesive tape or a patch of wool.If you use the insulation of windows on the Swedish technology with their own hands, the windows can be freely open even in winter, to ventilate the room.

Swedish essence of the method is that using a special seal, which control the sealing of windows.And this method is called the Swedish because it was invented in this Scandinavian country.In fact, in this method, there is nothing difficult, and such sealing can be made and the hands.In European countries have long been used by the Swedish technology insulation of windows;reviews for her only the most positive.

How to insulate wooden windows on the Swedish technology?

With this technology wooden frames do not have to change, that is a big advantage.With this method, the window structure will have to be partially disassembled to install additional insulation.This article can be found with photo insulation windows on Swedish technology, and the whole process will become clearer.

After dismantling is not only necessary to apply silicone sealant, but also set up hardware and then all gather again.But before you get started, you will need to do some shopping: sealant, seal and, most likely, the new hardware.But such expenditure can not be compared with the purchase of new plastic windows.

To understand the technical nuances of this method, is to see video and thermal insulation of windows on Swedish technology, which is also given in this article.It should also reflect on what tools may be required in the process.The whole process is necessary to distribute and plan everything, and only after that can disassemble the first window.

After dismantling of the window, in a wooden frame will need to be made with a special cutter to make a groove in which the seal is fixed subsequently.To remove the frame simply removed from their hinges.Currently, you can choose from several rubber seal species:

• sealant, based on silicone is used;
• EPDM seal;
• seal TPE.

Although the last option the cheapest, but a heater can not go to all climatic conditions.

When the slot is ready, the window must be carefully checked for defects that need to be addressed.After that is laid in the groove and pull the glass sealant is set back in place and secured.But in order to achieve the best possible sealing on the sash frame and tubular rubber gasket is fixed.There is also a small groove, which is necessary to fix the seal.When everything is ready, then the frame is set in place.