Build Daily

Wallpaper

August 12, 2017 18:05

How to glue the glass fiber

click fraud protection

Decorating the walls - an important task, no matter what type of wallpaper you have chosen.If this is the usual paper wallpaper, then you need to know only the general rules.If this Non-woven fabric, it is necessary to read the instructions and use a special glue.It is the knowledge of other required stickers process fiberglass for painting, which in recent years have become very popular.To decorate your home this option, simply do not know enough, it is important to study the process, learn all the details and sequence.Therefore, we will describe in the most simple examples of how to do everything correctly.

Content

  1. Preparing walls
  2. The blank canvases
  3. Attaching fiberglass
  4. painting fiberglass
  5. Video gluing fiberglass with his hands

question of how to glue the glass fiber, is based on three importantmoments.First of all, you need to study in detail all the advice and recommendations.Well, if that you use our photos and videos, with all the nuances that will describe all the work.Thus it is necessary to have on hand and the necessary tools at hand (knife, spatula), which will be needed in the course of work.The third important point - this is the correct application of theoretical knowledge in practice.Therefore, we invite you to learn about each stage.

Preparing walls

It is identical to the one as in the usual version of these products.The main task - to clean, align and peregruntovat surface.When irregularities are removed when the wall is primed, you can proceed to the main stages of activity.Just remember that, unlike other fabrics, glass fiber rolled into a roll, so they need to deploy, taking into account this point.

The blank canvases

It begins when the wall has dried up.Only then can you begin to cut the roll into pieces Covering height, in this case must be allowance (up to 10 cm) to be able to combine the drawing correctly.In this case the room temperature should be at least 18 degrees and the humidity - 70%.These factors affect the quality of the work, so it is important to prepare the area in a timely manner.Keep in mind that sticking fiberglass - a special work that is not carried out when there is a draft, so they must be eliminated.

Attaching fiberglass

When the fabric is already cut, you need to apply glue to the wall (it is diluted in water at room temperature), and the start wallpapering should be from the door.

And further, taking into account the height of the lean against the wallpaper to the wall.It is important to ensure that the web has been fixed as straight as possible.

Cut off the extra inches should be a special office knife, which should be prepared in advance.

To the canvas was flat and was not formed with the air bubbles, it is necessary to smooth plastic spatula.

Next, it is necessary to continue to glue the glass fiber in the same way, only with each segment, there is a problem matching the pattern.Therefore, carefully watch not only for evenness canvas to the floor, but also coincidences.

joints Places - is the most difficult, because it should not have a special spatula pressure, so as not to glue made.Such manipulations are carried out with each new piece, until the completion of the work.

painting fiberglass

After completion of the step of gluing fiberglass, it is necessary to wait 24 hours and then you can begin to paint them.Paint application consists of two layers.The second layer is applied at least 12-15 hours.

Below you can watch a video on how to properly pokleit fiberglass.

Video gluing fiberglass with his hands

instagram viewer