Build Daily

A House And A Garden

August 12, 2017 18:05

Bird feeder from a tree with his hands

click fraud protection

original bird feeders made of wood will be a useful and stylish element in any garden.Produce can be of small plates and rails.Also required to buy bolts, small nails, metal-socket pedestal.The work may hold any homeowner.

Content

  1. create blanks for feeders
  2. Step by step assembly instructions
  3. How to install a bird feeder and how to take care of it?
  4. Video creation wooden bird feeders

create blanks for feeders

To assemble the roof and platform under it need to saw the two parts of the roof, base, low bumpers.For the quality of the roof assembly is required to prepare a "mini-rafters."It is necessary to saw an isosceles triangle with one angle of 90 degrees.On the opposite side of the semi-circle cut.The procedure was repeated two more times.

begin production of bird feeders made of wood with their hands should be off the roof.Contractor is required harvested rafters waterproof glue stick to the marked locations and additional profits with small nails.

After you can start the site collection.A small rectangle, which will be located under the roof, with the longitudinal sides complemented bumpers (first glued after nailing nails).

buy additional metal pile support in the form of a cone, procured two narrow, flexible strips of wood that will be used as a stand.You will also need the wood-stick.From these elements and is collected, and then installed bird feeder.

Step by step instructions for assembling

on wooden planks, poles, drill hole 4-D for their bonding.

Once the holes are made, you can proceed to the drilling brackets for installation of the stick-blank: it will be located just below the main site.

Next wooden bird feeders made by such instructions:

1. All of the products are painted with special paint on wood (additionally protects material from moisture).

2. Trims supports are attached to the platform as the attached photo.

3. The upper part of the strips cut away at a slight angle to allow their attachment to the roof.

4. slats bolted to the roof.

5. Set the wood.

6. Roof pasted over (as an adhesive sealant should be used) with roofing material.Joint sheets on top of the roof is further pasted over a small piece of roofing material.

At this stage, the Executive will receive a beautiful bird feeder from a tree, which will be completely ready for installation.It is recommended to have it far away from the trees, then the birds will be easier to fly up to it.

How to install a bird feeder and how to take care of it?

In addition to information on how to make a bird feeder from a tree, you need to take into account the requirements for plant reliability.To this end, the metal wedge should be firmly driven into the ground, pre-located in a hollow bowl small bars.

support is inserted after the two bars.To achieve a strong fixation on the sides of the pillars, beams planks firmly hammered into a metal wedge.

This installation method completely eliminates the displacement feeder from a strong wind or during heavy snowfall.

studying the attached videos, you can see how stylish and original looks manufactured item around a garden or yard.But it is necessary to take into account the specific rules of care Manufacturing designs.It should be in violation of the integrity of the coating to hold the cleaned surface of the old paint and a new cover.Such a procedure may be necessary every 3-5 years.Additionally, it is recommended to impregnate the wood preservative.This will help protect the bird feeder made of the impact of rainfall and prevented it from damage caused by pests.

Video creation wooden bird feeders

instagram viewer