How to make a warm floor in the balcony ?

heating cable

You must understand that the installation of the heating cable and fill screed beneath it takes a lot of time.If you understand all this, and yet decided to make the balcony heating cable, then proceed with the following instructions:

1. Remove the old floor and level the surface by screed.
2. Make warming the floor and walls with foamed polyethylene-coated foiled.Joints sure to seal the metal tape.
3. On the balcony perimeter seal the damper tape that during thermal expansion of ties will protect the floor from warping.
4. On a layer of insulation secure a grid or mounting tape for mounting an electric floor heating in the loggia.
5. Secure heating cable with the same pitch that you want to calculate, focusing on the area of ​​the room and the recommended power output - 250 W / m2.
6. Set the thermostat and the temperature sensor at a suitable location.
7. rang chain to make sure that everything is properly connected and working.
8. Take a picture of the finished electrical heating system to repair, if necessary, to know exactly where that is.
9. Prepare cement-sand mortar and fill screed 4-5 cm. Thick
10. When the solution hardens completely (wait a few summer days are enough), you can move on to installing tile or linoleum flooring.

If you decide to make an electric floor heating on the balcony using a heating cable, please note - laminate flooring and in this case can not be used as a floor covering.

see the process of laying the heating cable on the balcony you can in this video example:

heating mats

Installation termomatov on the balcony is much easier to implement, sinceit does not need to calculate the conductor laying step and pour the concrete floor.The advantage of heating mats is that they are not so much reduce the height of the ceiling.

If you decide to do electrical heating loggia termomatami, proceed with the following technologies:

1. Prepare a suitable piece of the mat to cover the entire area of ​​the room.Typically, the width of half a meter termomaty release and up to 30 meters long.You can cut a suitable piece for their environment.The main thing - do not zadente heating cable on the grid.
2. Follow laying material old tile or concrete floor.
3. Connect sensor and a temperature controller.
4. connected correctly.
5. Over mats make paving tiles on special tile adhesive.

As you can see, the installation of electric underfloor heating on the balcony with his hands in this case is quite simple.Note that termomaty stacked without insulation!

For more information see the process of laying you on the video tutorial below:

Infrared film

Well, if you decide to use as flooring laminate flooring or on the balcony of the floorboard, then the only option - installation of infrared film floor heating.Its advantage - the minimum thickness of the material, which will not affect the ceiling height.

So make yourself an infrared heat-insulated floor on the balcony, you can using the following technologies:

1. Align the surface, making the rough screed (if the old floor has defects and irregularities).
2. Prostelite layer of insulation.
3. Follow laying infrared film.
4. Install the temperature sensor and thermostat.
5. Connect the wires to the film, connecting places carefully insulate bituminous composition.
6. Cover the finished floor heating on the balcony or laminate flooring.

This option loggia heating electricity the most modern and cost-effective.The film has better heat dissipation, asthe heat will not be spent on heating of the concrete screed.As the reviews on discussion forums, film installation of floor heating on the balcony - the most effective option of electric heating.

Video instructions for installing infrared film:

Here we have provided all the existing variants of the room heating via floor.We hope the given material to help you learn what material to choose for their own conditions and how to make an electric floor heating on the balcony with his hands!

will be helpful to read:

• How to make light on
• balcony How to pay less for electricity
• Electricity consumption underfloor heating