Recommendations regarding the selection of electric underfloor heating

selection Criteria

material flooring

Thus, the main condition, according to which the choice of electric underfloor heating, a material surface finish - tile or laminate.

Installation of floor heating under the tiles is carried out using a heating cable or termomata.This is due to the fact that these materials are not afraid of moisture, which can not be said about the film infrared heater, which fits only "dry".

If you have decided to carry out installation of electric underfloor heating for laminate (or floorboard), then there is need to select a film, becauseheating cable will not provide sufficient heating of the laminate (of the material poor thermal conductivity).By the way, linoleum is also recommended to use this version of the heater.

Ceiling height

If your conditions of use will be the matter tile floors or parquet, the following criterion for choosing an electric floor heating is the ceiling height.To create a floor heating using a cable requires concrete screed, minimum thickness of 3 cm. Together with insulation and finishing materials room can be reduced to 8-10 cm in height, it is not always profitable.

If you choose termomat, the presence of the concrete screed is not required, thereby reducing the height of approximately 5 cm.

In the case of film-coated height will not change by more than 2 cm (including insulation), because the thicknessinfrared emitter is less than a millimeter.In this respect, better select infrared film than the other materials.

premises Humidity

Next, an important criterion for selection of electric underfloor heating - the humidity of the room.Of course, today there are many waterproofing materials that will not pay attention to this problem, but still unnecessary costs and concerns for the security force to reflect on the correct choice of electric underfloor heating for the house.

So, by analogy with the "wet" and "dry" laying need to select the appropriate option.For the bath, bathroom, toilet and other rooms with high humidity is common to use a tiled floor, it can be used only termomat and cable.If you decide to use laminate, the special restrictions on laying thermofilm not, the main thing that was a quality waterproofing and ground.

We recommend once again not to risk their safety and choose termomaty.In addition, these products can be installed with a bend, creating a heated paths for walking.

Financial Opportunities

Ironically, the cost of floor heating is considered to be not the most important criterion for selection.This is due to the fact that prices are almost the same, if we consider not only the heaters, but also additional costs.

now analyze in detail all 3 options:

1. cable .The cheapest of all the candidates.At the same time it should take into account the additional cost for materials for concrete screed cement, sand, plasticizer.
2. Termomat. cost up to 25-30%, but the presence of the screed is not mandatory.
3. film .The most expensive of all the above options, but at the same time the consumption of electrics 1 meter square.she is the minimum.As a result, after a while a film coating pays for itself, that knocks him into the lead in the criteria.

recommend immediately familiar with the review of all existing types of underfloor heating:

costs of electricity

It's no secret that the majority of buyers in the first pay attention to the powerheater, which is a key indicator of profitability.The more power, the more kilowatts per hour winds the heating system and, therefore, should be to choose the most cost-effective.

In second place - cable.It is the best option for the laying of electricity-saving considerations.And the last stage of the rating occupy termomaty.They tend to consume 30% more energy than a cable, not to mention the film coating.

Worth also view the most economical home heating system possible information will be useful for you, and you decide to make a combined heating.

should also provide an alternative view on the economy.Cable heating screed allows heat the room for a while after turning off the system.To warm up the concrete layer will be for some time to radiate heat, while not consuming electricity.At the same time when disconnected sex film, the material cools down instantly.

Features

installation Another important factor is the choice of electric underfloor heating - how complex are the installation work.In the case of film and laying mats is fast, without too much difficulty.In addition, as we have said a concrete screed, these products do not require (and interfere with the solution and pour on the level it is not simple).

As for cable, it most difficult to style, becauseand the solution must be to fill, and the turns at an equal distance from each other to place, and even the calculation of the material is much more difficult.That is why we recommend choosing one of the first two options.

Availability service and repair

The whole point is, again, in a concrete screed.If after a time after the creation of a warm floor it will stop warming (fail), required repair work, possibly with the need to access to the heating elements.

If you select a heating cable, you will need to break up the floor for heating, according to the project look a coupler (usually it goes down), replace, and then pour the screed again.

In the case of infrared film and mats need only remove the top finish, which gives access to all the constituent elements in need of repair.

Summing up

So, we have provided you with the most important information on how to choose the electric floor heating for the house.As you can see, the criteria are very diverse, and to buy the most suitable products will need to sacrifice something.We recommend you give preference tape-version, asit is the most advanced, cost-effective and easy to install.

advise view the seminar, which examines in detail the features of the use of each option:

Finally I would like to pay attention to what the electric floor heating is better to choose forcompany.Today, leaders in the production of these heaters are of AEG, Rehau, Valtec and Green Box.If you really do not understand is what the producer is better to trust, you know, these 4 companies have a lot of positive feedback from customers and a good reputation in the world market.

Advised to read:

• Compare electric fan heaters and convectors
• advantages and disadvantages of electric underfloor heating
• Wiring the heating cable floor heating