Build Daily

Country Houses

August 12, 2017 18:06

The main methods of water purification from a well - osmosis , chlorination , aeration

click fraud protection

water Many owners of suburban real estate, and more often, vacationers, for its water needs are taken from the well.However, the water used for drinking or cooking, must undergo additional treatment, and today we'll talk about how clean the water from the wells in various ways.

most commonly found in such water iron.Excessive its concentration leads to clouding of water, and using, for example, laundry items, leaving them on the spot.The presence of this chemical element can not immediately notice.However, some time after the water is poured into the vessel, it is possible to detect a characteristic precipitate at the bottom.

In the water, in addition, there are various salts.If the strong content of sodium ions, such water is not recommended for people with high blood pressure.Often there are hydrogen sulfide, a large concentration of magnesium and potassium.

main water purification methods

Reverse osmosis

This cleaning system is the most efficient and versatile.It allows you to get rid of a few kinds of impurities.The principle of operation of such a device based on the properties of the membrane, which is one of the filter elements.It transmits only H2O molecules, delaying everyone else.A cross-over washes applied the membrane itself, preventing it from clogging.




However, we must bear in mind that these filters are installed on the water pipe.So, before you purchase the product, you must know exactly what the water pressure - depends on it and the choice of a particular model.

cleaning reverse osmosis

Chlorination

This method is effective, but malopriemlem as the water gets specific taste.

Aeration

ayration1 For this purpose, the so-called "bryzgatelnye" installation.Also used "against" iron.

were considered secondary treatment processes.However, there is also the primary.It is necessary to pay attention to the quality of water, which comes directly from the well.Very often the cause of pollution - the well siltation.On which it has structure (a straight trunk or filter) is dependent and purification method.

In any case, you should determine the cause "flooding".They can be:

  • low water consumption;
  • incorrect installation of deep tube;
  • not match the kind of pump;
  • mismatch filter diameters and pipe.

Before addressing the issue of water from the water treatment, should be well cleaned very well, and only then be determined with further purification procedure.There is also such a recommendation - to pour gravel on the bottom of the well.He will play the role of an additional filter.

Tip!Before you decide on the method of cleaning, it is advisable to contact the SES with a request to make an analysis of the water samples.Then it becomes clear what method to use.

instagram viewer