Swimming pool in the country with their own hands with the alpine slide

In this lesson we will look at the construction of the pool on the site with his own hands, it is worth noting that elevate your site is not that difficult task it depends on how much you are willing to experiment with finishes and give your pool clarity and completeness.

materials that will be needed for the construction of swimming pools:

1. Thread - to draw the outline of the design.
2. Shovels - to dig a hole under the pool.
3. few concrete tiles - laying on the ground.
4. Sand - for compaction.
5. Stones - to give a beautiful appearance.
6. Canvas - for laying on the bottom of the pool.
7. gravel - for laying on the bottom.
8. pump - to create image alpine slide.

Step 1 - Making the contour of our pool

territory of our pool is metered by a thread that is fixed on a path to wooden poles, pool shape, you can create any, we chosethe form of an oval shape with a slightly reflexed edges.

Step 2 - digs a pit for

Dig a hole, you can use an ordinary shovel, this step takes an average of about 1-3 hours and depends on the number of people,that will dig your pool, we did it very quickly.

Step 3 - Finish with the digging of the pit under the pool

Please note that we have laid the earth mound at this stage that in the future will provide for usdesign for the waterfall that we establish together with a swimming pool in our summer cottage.

Step 4 - Summing pipes under the pool

In this step, we will need to sprinkle sand pool and take the pipe, which will allow us to organize our suburban Falls area.It sets it very simple and works through the pump, which in turn is powered by electricity.The pump will pump water from the pool and to raise our hill and work according to the cycle.

Step 5 - laid on the bottom of the pool polystyrene and rubber

Step 6 - obkladyvayut pool stone

Procurement stones - this is probably the most difficult stage of our work.Stone appropriate length can be very hard to find.A good option would be to go to the river bank and collect the stones there, but there is mostly gravel, but it's your choice.If you do not know where to find the stones, then we advise you to buy them in special DIY stores.

preliminary having leveled heap of earth begin the computation of stones, but it all depends on your imagination.

That's our pool will look after laying the stones, now move on to the next stage - a mound of rubble at the bottom of the pool (on tires).

After strewn with gravel fill with water.Please note that the stone should be well rinsed to your pool does not become muddy after filling.

Step 7 - Connect the pump to the alpine hill

As our unit from which water will flow - we chose a regular pitcher, agree - it gives a certain zest to our dacha pool.

pool with alpine slide is ready, it remains only to dissolve around him a small botanical garden, but that's another story of which we will share with you the following lessons from Stroy-shkola.ru.If you have any questions ask them in the comments.