Restoration of parquet or how to return the appeal of the old coating ?

Restoration of parquet or the surface is new?

For many years, flooring is considered one of the most high-quality, long-lasting and expensive flooring.It is environmentally friendly, has a superb look and unobtrusively brings a person closer to nature, creating a cozy and comfortable in his house.However, during the operation, he loses a bit of its luster - on the surface cracks, chips, scratches, lacquer coating is not so brightly shines in the sun.

If in case you visit the idea of ​​how to remove the old flooring and replace it with new, then perhaps you are in a hurry.Imagine you take the time to dismantle the old coating, training grounds for new, its styling.Of course, no cost and without significant financial costs.

perfect alternative to maintain a decent appearance of the beloved parquet - its restoration.You spend your time on the job, but the result is sure to please.In addition, you will save a good, carrying out such repairs parquet with his own hands.Instead of a new coating and related tools you will need to stock only:

• grinder (you can take the time with friends or even rent);
• parquet adhesive;
• inserts of the same (or similar) of wood, from which made flooring (needed for sealing large gaps);
• trowel and brushes with bristles of varying stiffness;
• varnish stain.

It should be noted that the restoration of the parquet with his own hands - not the most "clean" process.Practice shows that even the existence of a special dust bag on sander will not save your eyes and respiratory system. That's why experts recommend the use of respirators and goggles. Hands can be secured by using gloves.Protect from contamination furniture and walls (if performed) is possible by means of conventional newspapers.

How to update parquet - prepare the surface for varnishing

So you've wondered how to upgrade flooring and return it to its former attraction, where do you start?Firstly, you need to wash it thoroughly.This can apply special detergents, a wide range of flooring shown on the market.In extreme cases, it can become an alternative to a good washing powder.By these means, thoroughly clean the flooring surface and allow it to dry.Secondly, if it has a protective lacquer coating, it is necessary to remove the old layer of varnish.

can use modern high-quality grinder or solvent to remove the varnish.In the latter case, the varnish is softened and removed from the floor surface without difficulty.An even more effective way to remove the lacquer layer is to use a hair dryer building.

After sanding (nail polish remover), it is necessary to eliminate the existing defects.This stage is quite time consuming and tedious.Be patient, because of him, and the effort is directly dependent on the quality of results.So, how to restore the parquet if it has scratches and cracks?Eliminate gaps shallow pretty easy - just mix small chips obtained by sanding with a parquet glue.

Bring the mixture to the consistency of buttermilk and gently obscure the existing gap.The deeper gaps can be masked using wooden inserts of appropriate size.They are fixed by means of the same adhesive.If there is a violation of the natural pattern of wood, it is possible to restore it with a conventional sewing.

How to restore the parquet - grind and varnish coating

Now you are almost a master in the question of how to restore the parquet: you passed the stage of his cleaning, sanding and removal of visible defects.You are ready to finish polishing the floor and its subsequent varnishing.Thus, the restoration of old parquet assumes its careful finish polishing, for which you will need varying degrees of abrasiveness of the material.

First we need to perform a coarse abrasive polishing, then repeat the process medium and fine abrasive.After that, the parquet surface is cleaned from dust and dirt with a damp cloth and dry. Once dry, you can proceed directly to the application of varnish, but if your coverage dimmed, you can use stain, which will give it the desired shade.

only after the stain has dried, you can apply the parquet lacquer.Experts recommend choosing formulations designed specifically for this type of coverage.Purchase paints, resistant to abrasion, mechanical damage and exposure to sunlight.So, now you know exactly how to refresh the parquet, a little effort and spending a minimum of cash.