Drying Oksol - an artificial basis for paint case

Introduction to

material Solvent content in Oksol ready solution - not more than 40%, and the remaining 5% - the mass fraction of the desiccant.The solvent, which is in a part of oksolem, gives the whole mixture characteristic unpleasant and pungent smell that persists for some time and after drying.This linseed oil, due to the presence in the composition of the various components, significantly cheaper than natural drying oil, but does not differ from it either in form or in properties.

characteristics depend on the varnish used in the composition of vegetable oil, it is divided into two subspecies.Better linseed oil is made with linseed oil.The coating has a hardness, water resistance, elasticity and has a maximum durability.Accordingly, cheaper linseed incorporates other oils (sunflower, soybean, corn, etc.).

Features oksolem

Depending on the used components produced Oksol brand B and PV .Linseed oil brand in made using hemp or flax oil.It is used in the paint industry in the production of oil-based paints and different pastes dilution paints that are needed in the interior and exterior painting works.In

based varnish mark MF is sunflower, safflower, grape, corn oil or other, and possibly partial replacement of these oils petroleum resins.For the production of this brand varnish oils are used, the use of which is possible in the food industry.

Oksol used for a variety of special impregnating wood surfaces or for processing plaster before painting. Drying Oksol, specifications are given by the respective guests, dries quickly (no more than a day) has excellent hardness and creates on the surface of the gloss effect.

Instructions for working with linseed oil Oksol

solution should be applied to pre-dried and cleaned from dust and dirt surface.All work is carried out at a temperature not below +10 ° C.Relative humidity should not be more than 80%. At this temperature Oksol dries not more than a day .If the solution is thickened, then allowed him dilution nephras, turpentine or mineral spirits, and mixtures thereof.

This material is flammable and toxic liquid, which is dangerous at elevated temperature.All these characteristics are due to the properties of components (oil and solvent), it is part of.

In areas where used or stored, this fluid, the presence of an open flame is prohibited.Electrical equipment and lighting sources should be explosion protection.Samu varnish should be stored in a carefully and tightly closed container, protected from direct sunlight, as well as varying moisture.

During the application of the liquid space, where it occurs, should be well ventilated.When using linseed oil Oksol PV , the manufacturer recommends to protect respiratory respirator and exposed skin - protective clothing and rubber gloves.

case of contact of the material with skin, quickly wipe it with a soft cloth and rinse this area with warm soapy water.Avoid contact with eyes varnish!