Baths of foam block

How to build a bath of foam blocks?

construction work for buildings of this material has the following sequence:

1. Foundation.It is necessary to dig a trench around the perimeter of the future 60x30 construction.After that, the pins are driven at the corners, intermediate and through additional 1.9 meters.Tensioned rope or thread for pins (it is necessary to detect irregularities).It is also recommended to use a laser level.The next step - the production of the reinforcing cage, the optimum thickness of 12 mm.Decking of boards should have a width of 25 mm.After all this, poured concrete, 70-75 cm in height will be sufficient foundation.Also do not forget about the drains, which is placed inside the base.Cement should be given a few days, so he froze.Now you can put the waterproofing and foundation will be completely ready.You can continue to build a bath of foam blocks.

1. walls.Using a level, you need to find the high angle and keep building on it.The longest stage will be the laying of the first row.Foam blocks should be fastened together with cement mortar, and then you must make sure that the surface is completely smooth.There handy previously stretched the cord, which will help during installation.Also we need a laser level.Further masonry blocks and bonding is performed using a special glue.It needs to be applied to the entire perimeter of the foam block.

1. roof.First of all you need to mount the rafters of the boards 10x40 cm, then - uterine 15h50 cm The optimum distance for crates -. Half a meter, and between the rafters -. 10.2 cm Thus, the ceiling (roughing) width 2.5 cm is attached between the queens.Next layer - this foam, 20 cm will suffice.The final stage - the attic floor, which will travel along the width of the boards with 2.5 cm

1. Internal and external processing..Penoblok require additional waterproofing treatment.For this purpose special impregnation material, and the insulating film.

best option facing the bath - it is ventilated facades.For their implementation will require:

• Ground siding
• vinyl siding.
• frame on which they are mounted.

Minimum indent facing away from the wall is 5 cm, no less.This is necessary for proper air circulation.The inside of the most sheathe timber.It is best to use a spruce or pine, as these woods valgoustoychivee others.

advantage of such baths

It is easier to build your own.Penoblok - an inexpensive and high-quality material.But most importantly - it works a short time, ease of implementation (compared with other materials) and environmental friendliness.Baths of foam blocks - is the best option for the construction of their own hands.