Soundproofing hardwood floors as the need to protect themselves from noise

Soundproofing hardwood floors

Sound is divided into two types: percussion (clicking of heels, steps) and acoustic (voice, music).They are distributed differently.Acoustic sound may linger objects and walls and percussive sound much worse lingers hard floors.Accordingly, the insulation must be carried out in various ways.

In the house are wooden beams ceiling and the floor.Beams are located between floors, perfectly spend all percussive sounds, because it is part of a compound of the ceiling of the first floor and second floor.Basically, their compounds are used for screws and nails, which are also excellent sound conductor.So how do you reduce the noise level?The main thing - it's not hard to make connections.It is necessary to do so to floor beams rested on soft material that will turn off the sounds of drums.

Note!Protection of percussion sounds should be performed during the design and construction of the building.Make this in a finished design is expensive and difficult, therefore, basically, is the protection only on the acoustic sounds.

To combat the acoustic noise to fill all the space between the beams with sound insulation properties of materials.Experts recommend use of soft fiber materials, as they have the highest absorption rate.Most commonly used for this purpose, or mineral wool boards made of fibers of coniferous trees.

Getting Started

In addition, owners of wooden houses are often interested in whether warming do interfloor hardwood floors need?For people who have trouble with the "departure" of heat through the upper floors, there is a need.Solving this problem will allow you to more efficiently heat the room, and, as a result, increase comfort in the home and reduce heating costs.In addition to the insulation, you decide the problem of soundproofing, which is also acute.As a conclusion: making the insulation of wooden floors, we can solve the problem immediately with the "departure" of heat and ambient noise problem.

Note!In general, do not necessarily overlap warming as much effect still will not, but in terms of sound insulation - it is a necessity.

making thermal insulation, it is necessary to take into account that there will be additional costs for the purchase of antiseptic and means for fire overlap processing.In addition, the need to pre-purchase all the necessary materials for insulation and tools for the job, as it will do everything as quickly as possible.For the insulation you will need:

• Insulation (mineral wool);
• board 30 millimeters thick;
• moisture vapor barrier film;
• nails and a hammer;
• Strong thread.

installation process

board nailed to the floor joists for the organization of sub-floor.Further blanketed surface moisture vapor barrier film so that there is an overlap of 100 millimeters between the sheets.It is necessary for the protection of insulation from the evaporation of the ground floor.So, putting insulation on top, first put a vapor barrier;If insulation is placed below, the film is placed after the heater.To fix the film to the thread which is wound in a zigzag on nails that are driven into the pre beams.When the film is completely fixed, nails hammered through.

Then in the space between the beams stacked material.Installation is done vnatyag, that is, the width of the sheet must be greater than 2 cm, than the length of the installation site.The thickness of the insulation must be at least 100 millimeters.Doing insulation, is necessary to achieve the maximum fit it to the joists so that no "cold joints".After that, put the finishing floor.

Note!Instead of sheets of insulation is often used expanded clay, which has excellent properties of the insulator.