Adhesive for linoleum - and you have no idea about such a variety !

Linoleum Glue - an overview

can start from afar - with division into two large species in nature base.The adhesive is water-dispersed, water-based manufactured and used in most cases.A may be the reaction which consists of two components and is preparing by mixing the epoxy and polyurethane components.

Now, it is worth mentioning the special cases of adhesives, for example, welding joints need a special adhesive for cold welding of linoleum.And in areas requiring removal from static electricity floor, used for antistatic linoleum adhesive containing conductive fibers.

features of various types of glue for linoleum

particulate adhesive is light work, non-toxic, does not have an unpleasant odor, and there varieties that meet all environmental requirements and non-volatile components in recent years.

it also provides a high grip when working with absorbent substrates.However, by freezing it loses its function and becomes useless, so it is best not to buy this type of glue on the open market in the winter.

dried glue on this type of negative impact affects water, which reduces the strength of adhesion to the base, so that should not be possible to use it in abundant moisture bases in operation, for example, in the locker room for a shower basin or bath.

Two-component adhesive , thanks to the polyurethane component, highly flexible, helps withstand high loads, has a water-repellent effect.Due to the lack of water in the composition does not produce shrinkage of the coating.Only it can be used for linoleum with rubber substrate, as well as for the device of warm floors.The main disadvantage of this type is a fairly high price.In addition, it is toxic, and when working with them must use appropriate protective equipment.

Terms of Use adhesives for linoleum

particulate adhesive used in most cases when laying linoleum with foam, homogeneous, fabric basis.Moreover, only this type of glue used for work with natural linoleum.

However, when applied to this type of adhesive is required to base on which will be laid coatings with absorbing properties, ie the ability to absorb moisture (concrete, wood, concrete and sand).This is to ensure that the adhesive force of an engaging developed a powerful, penetrating the surface of the base.

For laying linoleum, apply makeup with a notched trowel and press it to the strip of material, then rolled her roller to remove air bubbles, which adversely affect the quality of adhesion.

two-component adhesive is used when the base is not absorbent (painted surfaces, old linoleum), subject to thermal expansion (underfloor heating), periodically moistened (dining rooms, kitchens).It is also used in places where high strength of the coating, such as railway stations, airports, schools.Applying the same method as that of the dispersion adhesive.

Features specialized adhesives for linoleum

Adhesive for welding linoleum is of two types: Type A (for fixation of newly laid linoleum) and type C (to repair the old linoleum with divergent edges).It is transparent, the most easy to use, being packed in a tube with a needle.Its use is dictated by the position of joints and the instructions on the packaging.

Also worth mentioning about glue for PVC tiles, which, depending on the base material can be either dispersed or two-component.The methods of use are described just above.

Another structure, which should pay attention - conductive adhesive for linoleum .With him work like this: after opening it must be mixed thoroughly to conductive fibers are distributed evenly throughout its volume.

Then apply it on the base and roll out the linoleum, enclosing under him at length every 20-30 cm copper plates, connected to the ground, as well as two transverse plates at a distance of 20-30 cm from the walls of the room.Then you must carefully rolled roller cover to expel air bubbles, which is a dielectric and conductive properties of the adhesive deteriorates.