Variants of interesting homemade motoblock

Motoblock today is an essential thing, not only for farmers, but for any summer resident.Thanks to its application manages much facilitate the work that is associated with agriculture and the cultivation of suburban area.Currently, for motoblock it produced a huge variety of useful add-ons that make this device motoagregat designed for conventional plowing land or mechanization of harvesting grown vegetables.If there is a small amount of money and the desire to create, as well as the basic skills of working with technology, can be converted into a walk-behind with his hands, different kinds of useful homemade.

homemade What can be collected by transforming conventional walk-behind tractor

interesting options of homemade motoblock are different.It all depends on the needs and fantasies of its owner.Some homemade used to improve the soil, others for hunting and fishing, and some just for fun.There are several typical structures, which are most often found:

• Practical and convenient minitractor.
• Snowmobile for fans of winter fishing and hunting.
• not afraid of off-road all-terrain vehicle.
• swamp buggies to travel for cranberries.
• Motosobaka transport sleds.
• Karakat for driving on rough terrain.
• Similarity ATV.

For the construction of any of these units will need a basic knowledge of mechanics.

to construct mini-tractors and all-terrain vehicle of the two-wheel tractor

Almost all homemade, made from two-wheel tractor, designed to facilitate the work of the person.Anyone who does not plow the ground, dragging the car by the horns, do not know how hard and tiring.It is much easier to sit on it and go.However, the design of the product does not allow it to do without some alterations.Once you've made in the design of walking tractor certain changes, you can get comfortable and maneuverable minitractor.

However, there is one significant problem.You can not sit directly on the walk-behind tractor, without raising the center of gravity of the machine.This is unacceptable, because the machine can tip over when cornering.Therefore, a second width of at least 1.2 m axle. The wheelbase of the motor cultivator should be extended also to those limits.Turner this is not necessary because the required nozzles on the drive shaft are commercially available.They increase the distance between the wheels to the desired.

usually light or average tillers do not have a differential, which is negatively affecting their maneuverability.Therefore, you should set the rotary extensions restricting excessive rotation angle.

today do minitractor may even those who does not know how to handle metal, as commercially available ready-made kits for conversion, which consist of:

• frames fitted with mountings for the engine installation.
• footpegs mounted with its pedals.
• driver's seat.
• Leverage off semiaxes locking system.
• steering systems installed rods.
• front frame, equipped with brake discs and wheel hubs.
• rear hitch with a convenient hand-lifting mechanism.
• Wings.

big problems when retrofitting motor blocks minitractor using these parts does not arise.But turn the tractor on which to cultivate the land much easier and more convenient than walk-behind tractor.The design and every detail is accurate and adapted extinct.It has been tested in various conditions.Therefore, you do not have to adjust anything.

to collect from two-wheel tractor-terrain vehicle, the one who has made the tractor, only need to install a broad cross-country tires on wheels.For the above samodelok convenient to use a water-cooled engine, as it is less prone to overheating and can tolerate lengthy loads.

How to build from motoblock swamp buggies and snowmobiles

no significant difference between these two homemade products does not exist, since both he and the other must have a minimum ground pressure.To do this, you must make a special snow-wide bolotohodnye wheel.You can use low-pressure wheels or make adaptations of the old tracks of the snowmobile "Buran", as shown in the photo.This will place them directly into the standard wheels of motor cultivator.In order to put these lugs, wheels lowered and inserted them into the makeshift "bast".Then just pumped tires, and they dig into the lugs firmly.

Following these simple manipulations can safely go on a journey through the swampy plains or deep loosening of snow.In practice, we have shown that even low-power 6-horsepower engine from the motor cultivator is quite able to provide sufficient traction in difficult conditions, even on small slopes.

This swamp buggies able to bring any one bucket of cranberries from the distant and inaccessible swamps.

What motosobaka and Karakata

Who ever ride on What's the happy manufactured specifically for this purpose, pay attention to its striking similarity with the motor-block.Then, why not do it yourself.After the engine controls, a method of forming and torque transmission to the wheels are similar.The only difference is that motosobaki a pair of caterpillars, which allows you to move through the snow and pull a sled on the endless snow-covered field.To realize the dream of a finished product, so necessary for winter fishing and hunting, you can simply buy a ready set of tracks on the chassis.If for someone this construction cost seems high, you can make it yourself.To this end, it is necessary to thoroughly examine particular structures caterpillar design, which consists of a slave and the drive sprocket on each track and more rubber rollers.All this is mounted on a frame welded of channel.It also is attached the engine and steering wheel controls.To build a sled on skis already there is no difficulty, for the one who will cope with the previous task.

should not sidestep such an interesting home-made and as Karakata.Its advantages in large wheels, representing the chamber, strapped belts.Sometimes, instead of belts used trucks tires.They make it easy by cutting out unnecessary elements.Leave only the portion of the tread and the bead.To produce the most convenient to use an electric jigsaw.

for Karakata discs using conventional car, which carries the expandable structure.Sometimes it comes a very original, welding together two circular metal basin and cutting holes in their bottoms under the hub, as in the photo below.

While this Karakata of motor cultivator looks pretty clumsy, it is capable enough to overcome playfully wetlands areas, and carry up to 100 kg of cargo.

ATV from motoblock

Construct ATV from motor cultivator is quite real, but he will not have the power and speed of this, so the spacecraft engines Motor-blocks perfectly with the other parameters.But his and maneuverability will be no worse.

sit down in a quad is not needed because the motorcycle, but on a normal seat.The wheels do not need special for him.It is enough to find the right by a car that can be equipped with a wide-passable rubber.

Thus, tillers can be converted into anything, it would be the desire and need.Find suitable materials today is not no difficulty.