Laying cork floor with their hands - several ways of laying

Among other finishing materials used to create flooring, natural cork has a special place.About how to choose cork flooring read on our website.This is primarily due to its very high level of hygiene.Furthermore, cork flooring is very durable and comfortable to walk on it and thanks to the elasticity of the elastic material.And achieved the quality of the structure of cork consisting of a great number of microscopic cells, filled with a mixture of nitrogen and oxygen.

laying cork floor with their hands

floors of cork does not accumulate static electricity and can cause allergic reactions.Cork is not subject to mildew, rot and is not afraid of fire.It is attractive and the process of laying cork floor because of the presence of the creative moment when working with the material, each element has its own unique pattern.

Preparation for installation of cork floor.

Once you choose cork flooring and is found you liked cork flooring, you can start to work.There are no specific conditions for packing tube is needed.However, the surface is required for the installation perfectly smooth and free of debris.Material sub-floor does not matter, cork equally well falls on concrete and wood and metal.

If the wooden base is in poor condition, it is best to still close the sheet plywood or similar material (MDF, etc.), Putting them on the basis of brick luggage.For repair of the concrete base may require a mixture of cement and sand.

process of installing the floor

Laying cork flooring adhesive.

choice of adhesive depends on how the foundation will be laid cork, but best results are show blends that are designed exclusively for use with the plug.In the absence of such formulations are used and water resistant PVA glue.But it is necessary to take into account that some varieties of PVA tightening the cork, leading to cork shrinkage cracks and joints in place.

Mark up the rough flooring

sticker cork coating is carried out on the center of the room.Calculate this place is pretty simple: pull on the rope diagonally from corner to corner.Their intersection is the required center.Next you need through a central point to spend a couple of perpendicular, along which will be laying cork.

Technology laying

defined the desired pattern of cork floor, you first need to put it on the floor of the room just like that, without glue.If it turns out that one of the walls along the width of the strips of cork would be slightly less than along the opposite, that this distance will need to move the axis vectors.

begin to stick with the stopper should be integral elements.The adhesive composition is spread evenly on the underside of the tile.It is best to use a roller velor.And on the very foundation of the adhesive can be applied a special spatula with teeth.

After drying glue that starts sticking cork tiles.This is done from the center to the wall, which is positioned against the doorway.First 2-3 cork tiles are stuck on one track, then the same - along the perpendicular.Presses the plug to the base should be as tight as possible by controlling the magnitude of the gaps between the tiles.It should be understood that the gap is too large then it will be difficult to eliminate.This does not make the grout and the way it is done with the tile.

laying cork floor

new cork is necessary to arrange for a start in one half of the room, followed - in the other.This process is repeated until the entire plate is not over.Then, in the case will go to pieces.If you come across a narrow place, the tiles can be cut with a knife having a trapezoidal blade.At the same time we must not forget about the stock in 5 mm clearance compensation.

If in the process of bonding glue will seep to the surface of the tile, it should be immediately and thoroughly wipe with a sponge dampened with water.Navigate through svezheprikleennomu coating of cork can be almost immediately, but to establish it under heavy objects, including furniture, requires at least one day after the completion of the work.

Caring for cork floor covering is necessary, as well as for any other: cork tiles are waterproof, and not too whimsical.

How to put a "floating" flooring cork

«Floating» Cork flooring is a surface formed not independent pieces of cork, and sandwich panels with a decoration of cork layer.Technology laying of such panels is no different from the installation process, or laminate flooring.The only difference is in the ability to produce stacking on top of carpet.If the clutch is made on the concrete, the sandwich panels should be isolated from the subfloor with a film of polyethylene.To orient the panel is best along the direction of the main room lighting.