Build Daily

Bearing Structures

August 12, 2017 18:07

Anchor rod for a brick wall : dimensions according to GOST

click fraud protection

design anchors

Details of anchoring, as well as the Russian Federation gosudartsvennoy rules about them are regulated in the GOST 52042-2003.

GOST 52042-2003

Fig .238-1 anchors for mounting on the wall

anchor for brick wall

For brick wall most successful considers this type of anchors like wedge, yet it is called anchor rod.This choice stems from the fact that the heavy structures with a high level of density is chosen the most serious attachment.Its structure consists of a stud thread on one end and a fixing element konusopodobnoy form and the other nut.

Fig .238-2 anchor in the brick wall

Installation is simple:

  1. Drill hole puncher so that it coincided with the threaded fastener on anchor.
  2. Clean the wall of dirt and dust with a vacuum cleaner or hair dryer building.
  3. The wall anchor place and gently hammer it with a hammer.
  4. Tighten the nut on the bolt.Please note that it is necessary first to fully tighten and then release it.
  5. Insert pin on the fastening element and re-tighten the nut.

Fig .238-3 Wedge anchor in the brick wall

V-anchor is several sizes. From 3 to 30 cm in length and a diameter of 6 mm to 2 cm

Anchors are divided into several types:

  1. Electro
  2. Goryachootsinkovannye
  3. Stainless
  4. Acid

well, these anchor manifest themselves in securing large heavy structures, but in their selection should still calculate the required load and the thickness of the surface.

Chemical anchor for brick

To work with a brick wall, you can also use chemical anchor;particularly good solution for such a hollow materials.

himself anchor made of galvanized steel and has a supporting part that is revealed inside the brick.Also mount a locking bolt, which does not allow the entire device to fall into the wall.The length and diameter of the anchor are selected depending on the wall thickness and the presence of voids inside.

Chemical adhesive anchor has a vial of adhesive inside, which when screwing flows and hardens inside the wall.It allows you to make the most reliable fastening structure even for large structures.

Fig .238-5 Chemical anchor in the brick wall

the video in the next tab, you can see the installation of fixing installation in a brick wall and see the benefits of this type of fixture.

instagram viewer