Thermal insulation of pipes - how to choose the material and conduct the work ?

Why and what material will insulate the pipe?

piping must be protected throughout the length and on all the nodes, just so you can keep it for a long time in operation.To reduce heat loss - a decrease in the cost of maintaining a home and relieving the burden on nature in the form of lower fuel costs.To work most commonly used mineral wool layer with a reflective foil.

addition to mineral wool and other materials used.It:

• basalt cylinder;
• polyurethane foam;
• polystyrene;
• Penoizol;
• polyethylene foam;
• thermal insulation paint.

To protect pipes in open areas often use cylinders of basalt fiber, thus stacking trays are not needed.The protective layer on the cylinders produce from roofing material or foil insulating.

Consider options for insulation of pipes

greatest amount of work required insulation of pipes in the ground.Looking for excavation and insulation itself, combining the properties of waterproofing and insulation.The inner and outer cladding tube are compared with each other, and the space between them is filled with polyurethane foam.Parts of the system are mounted on the ground, can only protect the joints.It will not be difficult if you're in the hands of the foam.

Styrofoam or foam is applied very widely, it is known as a shell for insulating pipes.Made such a shell in two parts with a locking mount type tongue and groove.The diameter may vary, length - 2.1 meters.The foam does not transmit heat and does not absorb water, a shelf life of about 50 years.

can add fiberglass coating, foil or tolite, but without cover such isolation can be used universally."Relative" foam Penoizol, characterized in that it is produced in liquid form.It is applied to any of the pipe connections and allows you to create a sealed structure.

Warming of pipelines is also convenient to produce with the help of material Thermoflex , this polyethylene foam with closed air pores.This hollow tubes of different diameters, which are put in the pipeline, as the case.So insulated pipe can be laid directly in the ground, it is not deformed mass of the earth and has a shelf life of more than 50 years.

innovative way - thermal insulation paint, insulation is carried out when an aerosol spray containing ceramic nanoparticles.This spray penetrates the smallest cracks and crevices and hard to reach places, forming a tight coating of outstanding properties.

What to consider if insulation is carried out with their own hands?

Warming communications for home can be done with their own hands.Require protect water and sewer pipes, outside the home, they must be carefully insulated before winter.Pipes inside the house need to be isolated in order to have only hot radiators and heat loss from happening vain.

The choice of material depends mainly on finance.A common wool - Isover, Knauf - requires additional external insulator in the form of tar paper or fiberglass, and eventually the layer collapses and ceases to perform its functions.Glass wool is not recommended for external insulation, because it will have to change in a few years.

Basalt cylinders, expanded polystyrene, or Thermoflex thermal insulation paint is perfect for independent work.Shell for safety at the junction can be prokleivat tape and disassemble, if necessary.