How to make a bench out of logs with their own hands

Experts entered the fashion landscape design using natural materials for the recreation area in the garden and on the local area.Modernity keeps alignment with environmental friendliness, simplicity of the materials used, which is why the tree is given the first place.So it is preferable to wooden garden furniture and make their own hands, rather than bought.Domestic yourselfers take ordinary breathing timber, carrying the warmth, creating unique works of art at his dacha.It is necessary to abandon the rusting metal or plastic darkening when there is a tree.In this article we will talk about how to make the bench from logs.With this handle even a novice in domestic affairs.

Tips on selection of material for the benches

Traditionally, this wooden timber that is processed.You must select a wide beam so that when the cut and turned back sidushka convenient area.Some are used in conjunction with the log and planed boards, ready-made.Conventional logs need no specific treatment unless it logs of conifers.Here the main hitch for the resin residues.Wood requires that its obessmolit as during operation, it may spoil the clothes one who sits on it.

Video - bench from logs without nails

How to get rid of the resin conifer trees?

To do this, take a solution of acetone to water 4: 1.Apply makeup brushing is not wood, it is completely absorbed.Remains of the solution you need to wash and dry.For drying, you can use a hair dryer building.Another effective method - is the use of an acetone solution of caustic soda 20: 4.If you have a soda ash and potash, their ratio 6: 5 is adjusted to the consistency of sour cream, obmazyvaya resin timber space.The wood is covered with several layers of this composition, he carefully rubbed into the wood.When finished with the preparation of the logs, move on to the instrument.

Tools, which is in every house

«Gentleman" set - it's a chainsaw, or plain are alternate, sandpaper and rasp.To create decorative effects used jigsaw, a chisel or a chisel.It all depends on your initial skills.Straight cuts are obtained by using a chainsaw with are alternate will be much more difficult, it is necessary to connect to the process of another person.

Technology of creation of a log bench

Taking a fairly wide beam, the length of not less than a meter, you need to cut it into two parts.Further, it should be treated with the cleaning composition.One part of the cut would serve Seats, and the second - back.Stumps can be resistant backups if to dig them, and fasten the backrest with Seats can be planed wooden planks.Using nails to create benches, be sure to "bite off" their hats.

The same principle can be done and garden chair, then takes a smaller timber.Seats in it hollowed out in a circle, creating a comfortable place.

Tips on tree care

Since the wooden benches will be throughout the year on the street, can affect the impact of the surrounding environment on them.To the tree last longer, it is necessary to handle special structures against pests, they can be found in agricultural shops.Decorate the bench can not only carving, but also to paint or varnish.

to create unusual benches of logs, you will need a little more than 5 hours if you do it alone.There sidushka with stapled back is not installed on the petrified stumps, and small round processed Poleshko, whipped with each other.Below is nailed between Poleshko strong jumper, holding the entire structure.

Decorative benches made of logs

With imagination and a desire to do something with their own hands, using only a chainsaw to saw sticking out of the ground in a large tree stump wooden chair.There are many options for creating a garden benches suburban area.For example, if a sawn timber thus cutting off at an angle of 03.02.That will have something like the open mouth "Pac-Man" or notched round cheese.Beam mounted on struts attached thereto.If you use the vine branches, pre-soaked in water, can be decorated wood bench bizarre forms.Vine -Material strong and durable.Putting the bench to the ground, keep in mind that the "legs", in contact with moist soil, begin to rot.In this case, it recommended to do something like "insole" for legs.Cut the plastic cups right diameter and nail to the bottom of the legs.Still have a wooden hanger, which is not a pity to use for a new bench?Or have a wooden wagon wheel - use these materials with imagination - they can decorate your work.

Also read the article about the construction of benches for the garden with his own hands.