Glass fiber for painting to create unique interiors

advantages of fiberglass for painting

• Wear-resistant and durable material.Thanks to a sufficient thickness, as well as the special structure, this type of coating will withstand all kinds of scratches from animals, contact with prams and bicycles.
• Economical and affordable.All thanks to the fact that the cover has a reinforcing properties and does not require pre fillings.Therefore, no need to buy any more ties and mixtures.
• is an environmentally friendly material, as produced from a typical glass fiber (made of glass and sand).
• during combustion does not emit harmful substances, as opposed to other types of (non-woven, paper).
• Practical, can be subjected to restoration (capable repainted about 20 times).Therefore, the claws of the animal or the child's drawings on the wall are not terrible.It is enough to re-paint the surface.

Lows in the coating occur only when you purchase low-quality products (for example, second grade) from unverified manufacturers.Therefore, when buying a 2nd grade need to check the texture of the material, and it is desirable to buy a small piece of home and experiment with it.If everything is in order, then buy other rolls.But better, of course initially take the 1st grade.

first and second grade fiberglass, which is better?

Various manufacturers produce different quality wallpaper, which are conditionally divided into the 1st and 2nd grade.Wallpapers of first grade - considered the best, and applied to the surface without problems.they often do guarantee.Second grade - have a lower cost and there is no guarantee that you buy a really quality product.

Identify 2nd grade is not always possible.In some cases it is sufficient to deploy a roll and see the little pieces falling off.In the future, such a coating would crack.But it may also be such that you will not see external defects.So we have to check the cover.Bought a small segment of the wallpaper, glued and painted houses.If sticking test was successful, you can safely buy the remaining rolls.

pasting and painting fiberglass

Often acquiring this type of coverage, many people question arises - how to glue and how to paint fiberglass?Do they have their own characteristics.The answer is simple - yes, they have.Firstly, they can be applied not only on the wall or ceiling, but also on the door.Secondly, the glue to the paper itself is not applied only to the wall.In other respects the principle of operation is identical.Similarly prepared surface.

With the base is removed the old paint, whether it be paint, wallpaper or plaster.By the way, for this you will need to know how to remove the old plaster.Next it made plaster walls with special technology and primer using the latex composition of the neutral colors.The adhesive is chosen according to the directions on the package.Fabrics are cut with an allowance of about 5-10 centimeters."Butt" glued method.The coating must dry out.

Then the question arises - well pokleit fiberglass how to paint? to know how to paint fiberglass, present a number of simple rules.In order to better paint was applied, the wallpaper should be primed with diluted glue.After that, proceed directly to the painting, which used a fur roller, spray or brush.Brushes are used at the junctions with other surfaces.

If you do not know what kind of paint to paint the glass wall, then the best suited water-dispersed compositions.Also paint fiberglass should properly be selected by color.Try to avoid "aggressive" or too bright colors in a residential area.