Let us examine the types of corrugated board, to focus on the market

Types of corrugated board - that unites them?

Decking called cold-rolled steel sheets with longitudinal ribs (ribbed) trapezoidal shape.Much less flutes attach to other contours.Depending on the further use feedstock for the production of corrugated board is a simple galvanized steel, or it is the same, but with a polymer coating.

bearing capacity of the sheet is directly proportional to the height of stiffeners.With the ability to manufacture sheets of varying degrees of resistance to mechanical stress and to environmental influences, the choice of corrugated board and its scope is extremely broad.The service life of the sheet of galvanized steel and over 35 years, and coated - 45 and over.

types of corrugated board and their application

sheeting mounted in both the horizontal and vertical directions and is used for both internal and for external finishing works.For a decorative wall covering, for fences and gates for ceiling coatings are usually applied to corrugated sheets less than 20 mm.

High Altitude stiffeners required if using corrugated board as a bearing element.In general, this material is widely used in industrial and housing construction for the cladding of warehouses, hangars, shopping centers, in the construction of fences and the installation of the roof.He applied and permanent formwork device.

different types of corrugated board on a functional purpose.So, roofing used as a coating for roofs of buildings of different purposes.This is due to its visual appeal and a low sensitivity to the effects of atmospheric phenomena.

Not the least role in this is its ease of installation and transport, which led to its use also in the regeneration of various types of fences and gates.

Wall corrugated board used in the construction of walls and partitions.His profile may have additional drains, fixtures and locks, etc. Ball needed when building strong structures and floors, as well as the permanent formwork during the construction of the walls and foundation. Decorative used as a facing material.

Choice sheeting - where to look for clues?

determine how to choose the corrugated board for its intended purpose, it helps indexing (marking):

• C - height of the corrugations - 8-44 mm.For example, the name "profiled C44" indicates that the height of the corrugations is 44 mm.It used for the manufacture of fences, walls, gates and gate;
• H - the height of the corrugations - more than 44 mm.Click to create a permanent formwork, ceilings, awnings, canopies.It features enhanced load-bearing capacity.Very good for the repair and insulation of old roofing;
• NA - the height of the corrugations - 35-44 mm.Suitable for wall fencing equipment (kiosks, stalls, lodges, gas stations, hangars, garages, etc.) and decking.

but not limited to species of corrugated sheets only corrugations with different height since, depending on the application, they can be coated with different or no.Let's try to understand what is profiled according to the coverage:

• with the paint surface, is often used for decoration of the interior, is applicable in private construction;
• coated, is used as a roofing material;
• uncoated, used for formwork in the construction of load-bearing structural elements;
• both sides, protective layer is laminated on both sides.

also profiled on the contour profile and its height is divided into symmetrical and asymmetrical.Now that you know what type of sheeting is applicable in any given situation, there is no trouble to pick it up in accordance with need.